User manual JVC LT-26D50BJ

[. . . ] LT-32D50BJ LT-26D50BJ LT-32D50SJ LT-26D50SJ DynaPix LCD IDTV with D. I. S. T. INSTRUCTIONS Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Number: 3249 LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng. book Page 2 Thursday, October 7, 2004 4:42 PM Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If a new mains plug has to be fitted, then follow the instruction given below: Important Do not make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow. [. . . ] BBC NEWS 24 Enter PIN code BBCil 51. Select 0 Delete Edit Name Lock Favourites More. . . . 9 Enter PIN code D0217-EN BBC TWO Select Delete Edit Name Select PR OK Lock Favourites More. . Select function D0216-EN Edit PR name 3 Press the 6 buttons and choose a character, press the 5 buttons to move the cursor and edit the name, and then press the a button The edited channel appears in the Edit PR List. · Delete any unnecessary characters by entering spaces over them. 3 Press the number buttons to input the correct PIN code and press the a button If you have not changed the PIN code in the CONFIGURATION menu's "Enter PIN code" (see page 31), input 0000. If you have changed the PIN code in the CONFIGURATION menu's "Enter PIN code" (see page 31), input the PIN code you chose. The lock icon appears next to the channel name in the Edit PR List. 2 BBC TWO EDIT PR LIST 1. BBCi Locking a channel Digital terrestrial broadcasting (DVB-T) channels can be locked in the same way as the FEATURES menu CHILD LOCK. 1 Press the 5 buttons and choose Lock on the bar at the bottom of the screen Select 0 Delete Edit Name Lock Favourites More. . . . 9 Enter PIN code D0218-EN When a locked channel is chosen, the Enter PIN code input window will appear. If the correct PIN code is input, the picture appears. · When you forget the PIN code for the "Lock", you can unlock locked channels by performing Automatic Search (see "Installation" on page 34). 33 LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng. book Page 34 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu Setting the favourite channels Channels that you often watch can be set as favourite channels. You can choose from just those channels when the p p buttons are pressed. · After setting the favourite channels, check that "Favourite Mode" in "Configuration" (see page 30) is set to ON. 1 Press the 5 buttons and choose Favourites on the bar at the bottom of the screen 2 Press the 6 buttons and choose the channel to be registered as a favourite channel, and then press the a button The favourite icon appears to the right of the chosen channel. Installation Use when re-registering a channel or when registering a new channel. 1 Choose Installation and press the a button The Installation menu appears. Installation Automatic Search Manual Search Factory Settings D0220-EN 2 Press the 6 buttons and choose the channel registration method, and then press the a button Automatic Search: Choose to automatically register the channels that can be received. When Automatic Search is chosen and the a button is pressed, the confirmation window appears. Start automatic search?Yes D0221-EN LIST No D0219-EN To perform Automatic Search, choose Yes and press the a button. To cancel, choose No and press the a button. Manual Search: Choose to register a particular channel. Installation > Manual Search Channel Number 61 Signal Level: Signal Quality: Move cursor D0222-EN 0 . . 9 Enter CH number OK Start More. . Press the number buttons and input the channel that you want to register, and then press the a button. The Manual Search starts and the input channel is registered if it can be received. 34 LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng. book Page 35 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu Factory Settings: Choose when you have moved house etc and want to automatically re-register all the channels. In addition to registering all the channels that can be received, it will reset the timer settings. When Factory Settings is chosen and the a button is pressed, the confirmation window appears. Are you sure you want to delete the PR list and reset all settings?Yes D0223-EN No To perform Factory Settings, choose Yes and press the a button. To cancel, choose No and press the a button. Common Interface Choose when a pay television reception module is inserted into the Common Interface slot on the back of the TV, and you want to set the module. When Common Interface is chosen and the a button is pressed, the name of the inserted module appears. [. . . ] RCA connectors × 5 · Component video (Y, Pb, Pr) input and Audio L/R inputs are available. · 625p, 525p, 1125i and 750p signals are available. · Some DVD players can output 625p and 525p signals. · 1125i and 750p are new high-definition signals. [. . . ]