User manual JVC LT-40HG72U

[. . . ] LCD Flat Television Users Guide For Models: LT-40FH97 LT-40FN97 LT-46FH97 LT-46FN97 Illustration of LT-40FH97 and RM-C14G Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user’s guide in a convenient place for future reference. Keep the carton and original packaging for future use. Model Number: Serial Number: LCT2128-001A-A 0506TNH-II-IM LCT2128-001A-A English. indd 1 5/19/06 11:15:21 AM Important Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock. [. . . ] ❒ PG – Parental Guidance Programming intended for a general audience, but which may not be suitable for younger children. Parents may consider some content not appropriate for children aged 8-13. ❒ 14+ – 14 Years and Older Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. Programming may contain mature themes and scenes of intense violence. ❒ 18+ – Adult Material intended for mature audiences only. Directions to set Canadian V-Chip Ratings Press the MENU button π † To V-CHIP To operate (lock icon √® appears) Press ZERO to access V-Chip setup options π † √® To SET CANADIAN RATINGS ENG (for English) To enter ratings menu SET CANADIAN RATINGS ENG For example: To block viewing of programming rated 14+ shows, move the cursor to the 14+ column and add a lock icon. Once you've put a lock on the 14+ column, 18+ column is automatically locked. 18+ 14+ PG G C8 C √® To the 14+ Column Press the OK button to lock Press the MENU button to finish SELECT OK OPERATE MENU EXIT Notes: • If you want to change the setup, move the cursor to the column and change the lock icon to “—” by pressing OK again. • For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 43 in the French side of this user’s guide. 43 LCT2128-001A-A English. indd 43 5/19/06 11:15:54 AM Onscreen Menus Set Lock Code Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of “0000”. You may change the code to any four-digit number you wish. To change the lock code, follow the steps below. Press the MENU button π † SET LOCK CODE LOCK CODE 0000 √® To SET LOCK CODE To operate (lock icon appears) Press ZERO to access the lock code The first digit will be highlighted PRESS SELECT OPERATE OK TO FINISH MENU √® π † To select the number To move to the next digit EXIT Continue to follow these directions for all four numbers Press the OK button to finish (your lock code is now set) Press the Menu button when finished When a viewer attempts to watch a blocked channel, this message appears: THIS PROGRAMMING EXCEEDS YOUR RATING LIMITS. PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT. - - - - The channel will remain blocked until the correct lock code is entered (see above for information on setting your lock code). Notes: • After a power interruption you must reset the lock code. • Write your lock code number down and keep it hidden from potential viewers. • If you forget the lock code, a new code may be set using the steps listed above. 44 LCT2128-001A-A English. indd 44 5/19/06 11:15:55 AM Onscreen Menus Illumination The illumination feature allows you to adjust the brightness of the light on the front of the television. When you turn the power on the televison, the front panel light remains on when illumination is set to LOW or HIGH. Press the Menu button π † To ILLUMINATION To choose HIGH, LOW or OFF Press the MENU button when finished INITIAL SETUP PREVIOUS ILLUMINATION LOW LANGUAGE ENG. CLOSED CAPTION AUTO SHUT OFF XDS ID NEXT PAGE SELECT OPERATE MENU √® OFF ON (3/5) EXIT Language The language function is described on page 25 as the interactive plug-in menu. If you need to choose the language again, follow the steps below. Press the Menu button π † INITIAL SETUP PREVIOUS ILLUMINATION LANGUAGE CLOSED CAPTION AUTO SHUT OFF XDS ID NEXT PAGE SELECT OPERATE MENU √® To LANGUAGE To choose a language: ENG. (Spanish) Press the MENU button when finished LOW ENG. [. . . ] • The Video Status mode may be turned to the wrong setting. • There could be interference from another electrical appliance, such as a computer, another TV or VCR. Move any such appliances further away from the TV. • There could be interference from a high-wattage appliance, like a hairdryer or vacuum, operating nearby. [. . . ]