User manual JVC PD-42V31BJE

[. . . ] ENGLISH DEUTSCH FRANÇAIS PD-42V31BUE PD-42V31BJE PD-42V31BSE PDP COLOUR TELEVISION PDP FARBFERNSEHGERÄT PDP TELEVISEUR COULEUR INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D'INSTRUCTIONS 1 Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If a new mains plug has to be fitted, then follow the instruction given below: Important Do not make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow. [. . . ] MIN: The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN. · The MIN setting is not suitable for high-quality pictures which contain very little noise. MAX: The level of DigiPure effect is set to the maximum. If you set the Super DigiPure function to AUTO but feel that the original picture quality has not been reproduced fully, change the setting from AUTO to MAX. · The MAX setting is not suitable for low-quality pictures which contain a lot of noise. OFF: The Super DigiPure function is turned off. AUTO AUTO AUTO ON D1015-EN DIGITAL VNR The DIGITAL VNR function cuts down the amount of `noise' (`snow' or interference) in the original picture. You can choose from the three DIGITAL VNR function settings of AUTO, MIN and MAX. AUTO: The TV will automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the best possible picture. · If you set the DIGITAL VNR effect too high it can make the picture less sharp. It is recommended to use the AUTO setting if you can. · AUTO cannot be chosen when you are watching the EXT-4 picture. MIN: The level of the DIGITAL VNR effect is set to the minimum. If you set the DIGITAL VNR function to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the setting from AUTO to MIN. · The MIN setting is not suitable for low-quality pictures which contain a lot of noise. MAX: The level of the DIGITAL VNR effect is set to the maximum. If you set the DIGITAL VNR function to AUTO but still notice some noise, change the setting from AUTO to MAX. · The MAX setting is not suitable for high-quality pictures which contain very little noise. · When a progressive-scanning picture is being displayed, "DIGITAL VNR" cannot be selected. · The DIGITAL VNR function does not work for progressive-scanning pictures. 22 PICTURE FEATURES COLOUR SYSTEM The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. Then press the a button The sub-menu of the COLOUR SYSTEM function appears. COLOUR SYSTEM MAIN PAL SUB AUTO MOVIE THEATRE The MOVIE THEATRE function displays a cinema film picture more smoothly and naturally on the screen. [. . . ] This is the time required for the image to stabilize before it can be displayed. · The TV may make a crackling sound due to a sudden change in temperature. If you hear crackling sounds frequently while you are viewing the TV, there may be other causes. As a precaution, ask your service technician to inspect it. [. . . ]