User manual JVC RX-7042S

[. . . ] AUDIO/VIDEO CONTROL RECEIVER RX-7042S INSTRUCTIONS LVT1170-007A [B] Warnings, Cautions and Others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] For details, see the explanation of each item. Items SUB WOOFER* CNTR SPEAKER* To do Register your subwoofer. See page 26 26 26 26 26 26 27 27 27 27 FRONT SPEAKER* Register your front speaker size. SURR SPEAKER* Register your surround speaker size. SBACK SPEAKER* Register your surround back speaker size. SBACK OUT* DIST UNIT Register the number of the connected surround back speakers. Select the measuring unit for the speaker distance. FRNTL DISTANCE* Register the distance from the left front speaker to your listening point. FRNTR DISTANCE* Register the distance from the right front speaker to your listening point. CNTR DISTANCE* Register the distance from the center speaker to your listening point. SURRL DISTANCE* Register the distance from the left surround speaker to your listening point. SURRR DISTANCE* Register the distance from the right surround speaker to your listening point. SBACK DISTANCE* Register the distance from the surround back speaker(s) to your listening point. S WFR OUTPUT CROSS OVER Select sounds emitted from the subwoofer. Select the cutoff frequency to the subwoofer. Select the component connected to digital coaxial terminal. * This setting is applied to the both surround back speakers. Room size and the speaker distance According to the selected room size, speaker distance for each activated speaker is set as follows: Size LARGE Speaker L/R C LS/RS SB MID L/R C LS/RS SB SMALL L/R C LS/RS SB Distance 3. 0 m (10 ft) 3. 0 m (10 ft) 3. 0 m (10 ft) 3. 0 m (10 ft) 2. 7 m (9 ft) 2. 4 m (8 ft) 2. 1 m (7 ft) 1. 8 m (6 ft) 2. 4 m (8 ft) 2. 1 m (7 ft) 1. 5 m (5 ft) 1. 2 m (4 ft) 27 27 27 27 27 28 28 28 29 29 LFE ATTENUATE Attenuate the bass (LFE) sounds. DUAL MONO AUTO SURROUND Turn on or off Auto Surround. DGTL IN COAX Note: In the tables above, "L" stands for the left front speaker, "R" for the right front speaker, "C" for the center speaker, "LS" for the left surround speaker, "RS" for the right surround speaker, "SB" for the surround back speaker, and "SUBWFR" for the subwoofer. DGTL IN OPTICAL Select the components connected to digital optical terminals. VIDEO IN DVD VIDEO IN DBS VIDEO IN VCR This setting is not effective for European models. Select the type of video terminal used for the DBS tuner. Select the type of video terminal used for the VCR. 29 29 29 ONE TOUCH OPE Store the volume level for each source. Note: * These items can be set using Quick Speaker Setup. 25 Basic Procedure Remote NOT : shows the initial setting in the following tables. Setting the speakers To obtain the best possible surround effect from the Surround and DSP modes, register the setting about the speaker arrangement after all connections are completed. If you have used Quick Speaker Setup on page 24, this setting is not required. 7 Subwoofer setting--SUB WOOFER Select whether you have connected a subwoofer or not. [. . . ] After unplugging the AC power cord, contact your dealer. STANDBY/ON on the front panel to turn Press off the receiver. After unplugging the AC power cord, consult your dealer. Remove the obstruction. Sound from one speaker only. [. . . ]