User manual JVC TD-R611

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JVC TD-R611. We hope that this JVC TD-R611 user guide will be useful to you.

Lastmanuals help download the user guide JVC TD-R611.


Mode d'emploi JVC TD-R611
Download
Manual abstract: user guide JVC TD-R611

Detailed instructions for use are in the User's Guide.

[. . . ] Do not remove screws, covers or cabinet. Do not expose this appliance to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Press 1 or ¡ while tape is in play mode. The tape indicator blinks rhythmically during skip operation. Skipping to the beginning of next music If the current tape transport direction is £, press ¡. If the current tape transport direction is TM, press 1. Skipping to the beginning of current music being played If the current tape transport direction is £, press 1. If the current tape transport direction is TM, press ¡. · The beginning of the desired music may not be located properly if blanks between music are too short, the blanks contain too much noise or the music itself contains very low-level or silent part. To play both sides of tape continuously: DOLBY REVERSE NR MODE Press REVERSE MODE. The reverse mode indicator () lights up when the reverse mode is on, and turns off when it is off. When the reverse mode is on The two sides of tape will be played continuously and repeatedly. When the reverse mode is off Tape stops after one side has been played. To play a tape recorded using Dolby NR: DOLBY REVERSE NR MODE Press DOLBY NR. Each press switches the Dolby NR mode as shown below. DOLBY B NR DOLBY C NR (Indicator lit) (Indicator lit) Off (Canceled) Select B or C according to the Dolby NR type used when the tape was recorded. · It is not possible to record onto a cassette tape with the broken accidental erasure tab. Use a cassette the tab of which is not broken. · If you want to record music on both sides of tape continuously, switch the reverse mode on (see page 13). · If you want to use Dolby Noise Reduction, press DOLBY NR to select B or C (see page 13). 2 Prepare the MD recorder. Load the MD to be played. * Refer to the instruction manual of the MD recorder for the MD recorder operating procedures. 3 Press REC PAUSE. REC PAUSE CD REC The cassette deck enters record-pause mode. 4 Press </8 of the MD recorder. Synchronized recording starts. /CANCEL To stop recording: Press &/CANCEL of the MD recorder to stop recording. The cassette deck will stop after leaving a non-recorded blank of 4 seconds. If you want to stop recording immediately, press 7 of the cassette deck. 15 TD-R611 COMPU LINK Linked Operation of the Other Optional components (Compu Link) The EX series components can be controlled under linked operation provided by the JVC's Compu Link remote control system. Compu Link The world of single components, in which you purchase a cassette deck, CD player, amplifier and other components separately and enjoy your own composition, is an effective means for pursuit of high-quality reproduction. However, in terms of operability, the need of controlling components independently makes their control complicated and their linked operation impossible. Then, isn't it possible to combine single components and control them as simply as an integrated audio system?The Compu Link remote control system is the response to such a requirement. The components in the JVC EX series are equipped with jacks named COMPU LINK-3 (COMPU LINK jacks). [. . . ] WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JVC TD-R611

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JVC TD-R611 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag