User manual JVC THM55C-TH-M55 Instruction Manual

[. . . ] DVD DIGITAL THEATER SYSTEM TH-M65 Consists of XV-THM65, SP-PWM65, SP-THM65C and SP-THM65F TH-M55 Consists of XV-THM55, SP-PWM55, SP-THM55C and SP-THM55F TH-M45 Consists of XV-THM45, SP-PWM45, SP-THM45C, SP-THM45F and SP-THM45S INSTRUCTIONS For Customer Use: Enter below the Model No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. LVT1024-001A [J] Warnings, Cautions and Others 1. [. . . ] To turn off the surround mode Press SURROUND (ON/OFF). Each time you press the button, the surround mode turns on and off alternately. SURR OFF (surround off) O current selected mode (surround on) NOTE · When selecting "PL II MUSIC", "PL II MOVIE", "DOLBY D" or "DTS" as the surround mode, the SURROUND indicator lights. · When selecting one of the DSP modes ("LIVE CLUB"/"DANCE CLUB"/"HALL"/"PAVILION"/"ALL CH ST. ") as the surround mode, the DSP indicator lights. · For Dolby Digital 2 channel software, you can select "PL II MUSIC" or "PL II MOVIE". Storing adjustments -- auto memory This system memorizes the surround mode settings for each source. · When you turn the power off: When turning the power on again, the memorized settings for the current source are automatically recalled. · When you change the source: The memorized settings for the newly selected source are automatically recalled. NOTE · If the source is FM or AM, you can assign a different setting for each band. 31 Creating realistic sound fields Adjusting the sound On the remote control: 1 Press TEST. Check if you can hear the sounds through all the speakers at the equal level. "TEST TONE" and the corresponding signal indicator starts flashing on the display window, and the test tone comes out of the speakers in the following order; ] Front left speaker (a) ] Center speaker (b) ] Front right speaker (c) ] Surround right speaker (i) ] Surround left speaker (g) ] (back to the beginning) 2 Adjust the speaker output levels (­10 to +10). Adjust the center speaker and surround speaker levels as much as the sound from the front speakers. Use one of the following buttons to adjust each speaker level. · CENTER +/­ for the center speaker · SURR-L +/­ for the surround left speaker · SURR-R +/­ for the surround right speaker 3 Press TEST again to stop the test tone. 7 For DAP modes (A pg. 29) only 4 Press EFFECT to select the effect level (1 to 5) you want. Each time you press the button, the effect level changes as follows; ] DSP EFFECT 1 ] DSP EFFECT 2 ] DSP EFFECT 3 ] DSP EFFECT 4 ] DSP EFFECT 5 ] (back to the beginning) As the number increases, the selected mode will be more effective. (Normally set the level to "DSP EFFECT 3". ) NOTE · You cannot adjust the center speaker output level for the DAP modes and the effect level for All Channel Stereo. · You can output the test tone in any surround mode, or even when surround mode is not activated. · Speaker output levels whose source signal indicator is lit can be adjusted without pressing TEST. · When selecting DVD as the source, you can also adjust the speaker output levels using the choice menu. 49) 32 Advanced operations This section explains advanced operations for disc playback using the remote control. · shows the types of discs an operation is available for. · Turn on your TV and select the correct input mode on the TV. NOTE · If "B" appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do or information required for that operation is not recorded to the disc. 7 Contents of the on-screen bar during playback DVD Video CD Using the on-screen bar You can check disc information while the disc is loaded and you can use some functions using the on-screen bar. IMPORTANT Before using the remote control for the following operation; 1 Set the remote control mode selector to AUDIO. SVCD CD Cursor (3/2///5) /ENTER MP3 disc Showing the on-screen bar 7 Whenever a disc is loaded Press ON SCREEN. Each time you press the button, the on-screen bar changes as follows on the TV screen. Example: During DVD playback A B C D E F G Shows disc type. Shows current transfer rate (Megabits per second). [. . . ] 20 Dolby Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 ­ 31 Dolby Pro Logic II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 ­ 31 Pro Logic II Movie (PL II MOVIE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 ­ 31 Pro Logic II Music (PL II MUSIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]