User manual JVC UX-A70MDR

[. . . ] MICRO COMPONENT MD SYSTEM UX-A70MDR 1 4 7 10 MARK 2 5 8 0 ABC 3 6 9 +10 DEF GHI JKL MNO PQRS TUV WXYZ COMPACT DIGITAL AUDIO INSTRUCTIONS For Customer Use: Enter below the Model No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No. GVT0050-008A [B] Warnings, Cautions and Others IMPORTANT for the U. K. [. . . ] The MD insertion indicator ( · When the current source is MD, the information on the loaded MD appears in the main display as follows: If the MD or track has a title The title will appear in the main display. (If a title is long and cannot be shown at a time, the unit scrolls the title to show the entire title. ) Disk title (when the MD has a disc title) * About recording length mode MDs are played back in the same recording length mode as they were recorded. When an MD starts playing, the playback mode of the currently playing track lights on the display. SP : Indicates the tracks recorded in standard stereo recording mode on this unit or those recorded on an MD recorder incompatible with MDLP*. LP2 : Indicates the tracks recorded in 2 times long-hour stereo recording mode. LP4 : Indicates the tracks recorded in 4 times long-hour stereo recording mode. * MDLP features a new sound compression method (ATRAC3) and a 2 times (or 4 times) long-hour stereo recording and playing function. The MDLP logo is marked on the MD recorders and players compatible with MDLP. It is also marked on MDs prerecorded in ATRAC3 (excluding recordable MDs. ) Total track number Total playing time Ex. The MD has 12 recorded tracks. 3 Press MD # / 8. The MD indicators flash on the display and MD playback starts from the first track. The recording length mode indicator (SP/LP2/LP4)* lights on the display. ­ 25 ­ Continued Basic MD Operations While playing an MD, you can do the following operations. Programing the Playing Order of the Tracks -- Program Play You can arrange the order in which the tracks play before you start playing. On the remote control ONLY: To stop playback for a moment Press MD # / 8. The MD indicators lights on the display and the elapsed playing time starts flashing in the main display. To resume playback, press MD # / 8 again. To locate a particular point in a track during play Press and hold ¢ or 4. · ¢ : Fast-forwards the tracks. · 4 : Fast-reverses the tracks. 1 Load an MD. 2 Press MD # / 8, then 7. The source is changed to "MD. " 3 Press PLAY MODE so that "MD PROGRAM" appears in the main display. · Each time you press the button, play mode changes as follows: MD PROGRAM MD RANDOM To go to another track Press ¢ or 4 repeatedly. · ¢ : Skips to the beginning of the next or succeeding tracks. · 4 : Goes back to the beginning of the current or previous tracks. 4 Press the number buttons to select the tracks. · For how to use the number buttons, see "To go to another track directly using the number buttons (on the remote control ONLY)" to the left. The selected track numbers TRACK SP 5 7 9 Total track number & total playing time (Normal Play) To go to another track directly using the number buttons (on the remote control ONLY) Pressing the number button(s) allows you to start playing the track number you want. For track number 20, press +10, then 10. For track number 32, press +10, +10, +10, then 2. MD CD PRGM The current track Step No. To change the information in the main display On the remote control ONLY: Each time you press DISPLAY/CHARA, the information on the loaded MD changes as follows: When you press DISPLAY/CHARA while playing or pausing: The current track number and elapsed playing time = Track title* = Remaining recording time = The clock time** = (back to the beginning) When you press DISPLAY/CHARA when the MD recorder stops: The total track number and total playing time = Disk title* = Remaining recording time = The clock time** = (back to the beginning) * When track or disk has a title. [. . . ] You are trying to edit or record on a playback-only MD. Digital copy of the 2nd generation is prohibited. Use the external equipment connected to the LINE IN jacks (as the recording/ playback device. ) This unit can not unprotect it. To unprotect it, use the equipment with which it was protected. ­ 49 ­ Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. [. . . ]