User manual JVC UX-J60

[. . . ] MICRO COMPONENT SYSTEM UX-J60-- Consists of CA-UXJ60 and SP-UXJ60 UX-J50-- Consists of CA-UXJ50 and SP-UXJ50 RM-SUXJ60R REMOTE CONTROL SP-UXJ60 CA-UXJ60 SP-UXJ60 RM - SUXJ50R REMOTE CONTROL SP-UXJ50 CA-UXJ50 SP-UXJ50 INSTRUCTIONS For Customer Use: Enter below the Model No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No. GVT0102-008A [B] Warnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS IMPORTANT for the U. K. [. . . ] On the remote control ONLY: Press DISPLAY (orange-colored). Each time you press the button, the display changes to show the following information: PS PTY Station frequency (or preset channel no. ) RT (Radio Text) (Program Service) (Program Type) DISPLAY 1 If no PS, PTY, or RT signals are sent by a station "NO PS, " "NO PTY, " or "NO RT" appears on the display. On the characters displayed When the display shows PS, PTY or RT signals: The display shows upper case letters only. The display cannot show accented letters; for example, "A" may represent accented "A's" like ", , , , and . " Press PTY SEARCH. "PTY" and "SELECT" appear on the display alternately. PTY SEARCH 2 Press PTY SELECT + or PTY SELECT until the PTY code you want appears on the display. PTY SELECT + Each time you press the buttons, the PTY codes change as follows: NONE NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TEST ALARM (back to the beginning) 3 Press PTY SEARCH once again. While searching, "SEARCH" and the selected PTY code alternately appear on the display. The unit searches 30 preset FM stations, stops when it finds the one you have selected ("FOUND" and the selected PTY code appear), and tunes in that station. If no program is found, "NOTFOUND" appears on the display and the unit returns to the last received station. To stop searching any time during the process, press PTY SEARCH while searching. If you preset a station while PTY Search is being carried out PTY Search may not stop. If this happens, press PTY SEARCH to stop searching manually. 14 Switching Temporarily to a Program Type of Your Choice The Enhanced Other Networks function allows the unit to switch temporarily to a broadcast program of your choice (TA, NEWS, and INFO) from a different station. The function only works when you are listening to a preset FM RDS stations providing the data. To activate the Enhanced Other Networks function REMEMBER you must preset FM RDS stations to use the function. There is a time limit in doing the following steps. If the setting is canceled before you finish, start over from step 1. On the remote control ONLY: How the Enhanced Other Networks function actually works: CASE 1 If there is no station broadcasting the program you have selected The unit continues tuning in to the current station. When a station starts broadcasting the program you have selected, the unit automatically switches to the station. The indicator of received PTY code starts flashing. When the program is over, the unit goes back to the previously tuned station, but the function still remains activated. CASE 2 If there is a station broadcasting the program you have selected The unit tunes in to the program. The indicator of received PTY code starts flashing. When the program is over, the unit goes back to the previously tuned station, but the function still remains activated. CASE 3 If the FM station you are listening to is broadcasting the program you have selected The unit continues to receive the station but the indicator of received PTY code starts flashing. When the program is over, the indicator of received PTY code stops flashing and remains lit, but the function still remains activated. 1 Press TA/NEWS/INFO until the data type you want appears on the display. Each time you press the button, the data type indication changes as follows: TA NEWS OFF (Canceled) INFO TA/NEWS /INFO The selected data type indicator (TA, News, and Info) also flashes. TA: Traffic announcement NEWS: News INFO: Program the purpose of which is to impart advice in the widest sense. The data type indicator (TA, News, and Info) goes off. 2 Wait for about 3 seconds after specifying the data type. The data type indicator stops flashing and remains lit. See "How the Enhanced Other Networks function actually works. " More about the Enhanced Other Networks function The data sent from some stations may not be compatible with this unit and also some stations may not include Enhanced Other Networks data. [. . . ] The built-in microprocessor may malfunction due to external electrical interference. The path between the remote control and the remote sensor on the unit is blocked. The batteries are exhausted. Unable to operate the unit from the remote control. Replace the batteries. 24 Additional Information Description of the PTY codes: NEWS: AFFAIRS: INFO: SPORT: EDUCATE: DRAMA: CULTURE: SCIENCE: VARIED: POP M: ROCK M: EASY M: LIGHT M: CLASSICS: OTHER M: News. Topical program expanding or enlarging upon the news--debate, or analysis. [. . . ]