User manual JVC VN-E4

[. . . ] 4ch Network Encoder VN-E4 INSTRUCTIONS This manual describes the detailed usage of VN-E4. For basic usage of VN-E4, refer to the ASTART-UP GUIDEB. Refer Readme file the CD-ROM for updated information. LST0285-001A These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS Read all of these instructions. All warnings on the product and in the operating instructions should be adhered to. [. . . ] Refer to A5-5 Alarm Environment PageB for FTP environment settings. FTP can be set on only 1 action out of the 10 actions. TCP : Send message entered in the ATCP/UDP CommentB field to the destinations specified in AIP AddressB and APort NumberB via ATCPB. UDP : Send message entered in the ATCP/UDP CommentB field to the destinations specified in AIP AddressB and APort NumberB via AUDPB. Pin Output Make : Change alarm output to Make. Refer to A5-5 Alarm Environment PageB on parameter settings for alarm output. Pin Output Break: Change alarm output to Break. Refer to A5-5 Alarm Environment PageB on parameter settings for alarm output. For specifying the first trigger to invoke the action. Either alarm input (make), alarm input (break) or motion detect can be selected. Refer to A5-5 Alarm Environment PageB on parameter settings for alarm input. When the second trigger is turned off, the action will be invoked by only the first trigger. In addition, when motion detection is selected as the first trigger, AMax. IntervalB and A2nd TriggerB will not be available for selection, and only the first trigger will function. Valid only when the second trigger is specified. For specifying the maximum interval between the first and second triggers. Action will be invoked when second trigger occurs after first trigger within the maximum interval. For specifying the second trigger to invoke the action. Either alarm input (make) or alarm input (break) can be selected. Unlike the first trigger, motion detect is not available as a choice. Refer to A5-5 Alarm Environment PageB on parameter settings for alarm input. B 1st Trigger C Max. Interval D 2nd Trigger 25 Settings (continued) 5-5 Alarm Environment Page This page is for setting alarm-related environments. A B This page can be used upon access via AadminB or AoperatorB. [. . . ] The window scale can be altered by changing the Windows registry. Refer to Windows manual on procedures to change the Windows registry. Narrow network bandwidth or considerable jitter may cause failure of smooth transmission. This can be remedied by reducing the transmission volume. [. . . ]