User manual JVC XA-MP101

[. . . ] DIGITAL AUDIO PLAYER XA-MP51A/W/S XA-MP101B/W INSTRUCTIONS Thank you for purchasing this JVC product. Please read these instructions carefully before starting operation to be sure to obtain optimum performance and a longer service life from the unit. LVT1431-002B [J, C, B, US] CAUTIONS Listening precautions · Do not play your Headphones at a high volume. · Hearing experts advise against continuous extended play. · If you experience a ringing in your ears, reduce volume or discontinue use. [. . . ] · If no voice files are stored, "NO FILES" appears. 15 BASIC OPERATIONS LISTENING TO FM BROADCASTS You can listen to a preset (registered) FM station after presetting FM stations. The following two operation modes are available: Scan mode: Used to tune in to a station. A. Scan, M. Scan and S. Scan modes are available for tuning and then presetting. Radio mode: Used to listen to a preset (registered) FM station. ("Radio" appears. ) 91. 50MHz for England and Singapore Automatic presetting (Scan mode: A. Scan) Using A. Scan (Automatic Scan) function, you can automatically preset all detected stations (up to 20) to preset Nos. After turning on the player, press MENU button and ¢ / 4 button to select FM mode from Main Menu, and then press 6 button to enter that mode. Press and hold 6 button and then release it. To exit scan mode: Press MENU button. "A. Scan" appears and automatic scanning starts. After completion, the player enters radio mode. To switch between scan mode and radio mode: Press 7 button while "Radio" or "Scan" is displayed. To tune and preset station (Scan mode: M. Scan, S. Scan): You can listen to the desired station using M. Scan (Manual Scan) or S. Scan (Search Scan) functions. After tuning, you can preset the station to the desired preset No. , as required. 16 BASIC OPERATIONS 1. After turning on the player, press MENU button and ¢ / 4 button 2. To manually scan: Press ¢ / 4 button. to select FM mode from Main Menu, and then press 6 button to enter that mode. ("Radio" appears. ) Press 7 button to enter scan mode. Then, each time the button is pressed, the frequency increases or decreases step by step. ) To search for a station: Press and hold ¢ / 4 button. ("S. Scan" appears and an available station is automatically detected. ) · You cannot use M. Scan and S. Scan functions at a time. appear. ) To cancel store, press 7 button to return to scan mode. Press ¢ / 4 button to select the desired preset No. ("Radio" appears. ) Repeat Steps 2 to 7 to continue preset operation. You can listen to up to 20 preset stations. Before use, you need to preset stations in scan mode. After turning on the player, press MENU button and ¢ / 4 button to select FM mode from Main Menu, and then press 6 button to enter that mode. appear. ) Press ¢ / 4 button to select the desired preset No. To switch between Stereo and Mono, press 6 button. [. . . ] On a file exceeding 550, its operation is not guaranteed. 33 ADVANCED FEATURES LOCKING BUTTONS (HOLD) Slide the HOLD switch to the right to lock all controls. When the hold function is activated, the appears in the upper right of the display. To unlock: Slide the HOLD switch to the left. NOTE · When the player is turned on with the HOLD switch set to ON position, "HOLD" appears after the initial message "DIGITAL AUDIO PLAYER". Then, the player automatically shuts off. To use the player, set the HOLD switch to OFF position and turn on the player again. 34 TROUBLESHOOTING Problem Solution The player does not function. [. . . ]