User manual JVC XV-M5GSL

[. . . ] DVD VIDEO PLAYER XV-M5GSL Before operation 2 Preparations 3 Basic operations 8 Advanced operations 14 MP3/WMA disc playback 22 JPEG disc playback 24 Changing the initial settings VIDEO 26 Additional information 31 INSTRUCTIONS For Customer Use: Enter below the Model No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No LET0236-001A [J] Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION To reduce the risk of electrical shocks, fire, etc. : 1. [. . . ] · CONTRAST Adjust this if the far and near position is unnatural. · SATURATION Adjust this if the picture is whitish or blackish. Available range: ­16 (blackest) to +16 (whitest). · TINT Adjust this if the appearance of flesh tone is unnatural. · SHARPNESS Adjust this if the picture is indistinct. · Y DELAY Adjust this if the picture looks separately/overlapped. Available range: ­2 to +2. 4 Press ENTER. A window for setting parameters appears. The VFP (Video Fine Processor) function allows you to adjust the picture character according to the type of programming, picture tone or personal preferences. SATURATION +4 1 During playback, press VFP - PROGRESSIVE SCAN. The VFP mode selection window appears on the TV screen. Selected parameter 5 6 Press 5/ to adjust the level of the parameter. The higher value enhances the effect. Press ENTER. Repeat steps 3 to 6 if you want to set other parameters. 19 Advanced operations To define a user setting, press 5/ to select a parameter to be edited from the following. Advanced operations · When playing back a DVD VIDEO disc recorded with Dolby Digital that does not contain the rear signal, you can change the 3D PHONIC setting, but you will not be able to achieve a correct 3D effect. · The 3D PHONIC function does not affect the Dolby Digital bitstream signal from the DIGITAL OUT jack. · When the 3D PHONIC function is active, the [ANALOG DOWN MIX] setting in the [AUDIO] setting display is not available. 5//2/3 ENTER ON SCREEN Menu bar functions 3D PHONIC VFP-PROGRESSIVE SCAN To bring up the menu bar 1 To dismiss the VFP mode selection window Press VFP - PROGRESSIVE SCAN. When a disc is inserted, press ON SCREEN. A status bar for the type of disc inserted will appear on the TV screen. See page 11 for details about the status bar. 2 Press ON SCREEN again. A menu bar for the type of disc inserted will appear under the status bar. (for DVD VIDEO) 8. 5Mbps NOTE The window for VFP mode selection and parameter setting disappear if no operation is made for about 10 seconds. DISC 1 CHAP. TITLE 33 CHAP 33 PROG. RND. TOTAL 1:25:58 To simulate surround sound (3D PHONIC) 1/3 OFF 1/5 1/3 Advanced operations (for SVCD) Using the 3D PHONIC function, you can get a simulated surround effect from your stereo system. DISC 1 TRACK 33 OFF PROG. ST1 TIME -/4 25:58 1 2 During playback, press 3D PHONIC. The 3D PHONIC window appears on the TV screen. (for Video CD) DISC 1 TRACK 33 OFF PROG. ST Press 2/3 to select the desired mode. Each time you press the button, the 3D PHONIC mode changes as follows: (for Audio CD) TIME 25:58 ACTION DRAMA THEATER NONE DISC 1 TRACK 33 OFF PROG. RND. TIME 25:58 ACTION +45 (for MP3) DISC 1 GROUP 3 TRACK 3 OFF PROG. RND. Selected effect mode · ACTION Suitable for action movies and sports programs in which the sound source moves. · THEATER You can enjoy sound effects like in a theater. TIME 2:58 To dismiss the menu bar and status bar Press ON SCREEN. Basic operation procedure 3 Press 5/ to adjust the effect level. You can set the effect level from [1] to [5]. The higher value enhances the effect. 1 2 Press 2/3 to select the icon you want to work with. The selected icon is pointed by . To dismiss the 3D PHONIC window Press 3D PHONIC. Press ENTER. With many icons, an appropriate pull-down window appears, however, there are some exceptions. NOTES · The 3D PHONIC window disappears if no operation is made for about 10 seconds. · The 3D PHONIC function works correctly only when playing back a DVD VIDEO disc recorded with Dolby Digital. NOTES · A mark or text on the menu icon for the function or mode currently selected is shown in green. · Some functions are not available during playback. (You cannot move to the associated icon when it is not available. ) 20 Advanced operations Menu bar functions for DVD VIDEO Time mode selection During playback, selects the time mode shown in the display window and in the status bar. [. . . ] All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. WHAT YOU MUST DO FOR WARRANTY SERVICE: Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized service center, please call toll free: (800) 537-5722. If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number. [. . . ]