User manual JWIN JL-616

[. . . ] POWER SOURCES - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. CLEANING - The appliance should only be cleaned with a dry cloth. OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the device's openings. CARTS AND STANDS - The appliance should be used only with a cart or stand that is recommended by the manufacturer. [. . . ] The appliance does not appear to operate normally, or exhibits a change in performance. SERVICING - The user should not attempt to service the appliance beyond what is described in the user's operating instructions. All other servicing should be referred to qualified service professional. LEAD AND MERCURY - This product may contain lead and/or mercury. Disposal of these materials may be regulated by your local authorities due to environmental considerations. For more detailed disposal or recycling information, please contact your local authorities or the EIA (Electronic Industries Alliance) ­ http://www. eiae. org Additional Safety Instructions · When not in use, keep your device in a safe place where it will not be bent or crushed. -4- www. jWIN. com Digital Photo Frame V11M11_IM_EN_03212008 USER SAFETY GUIDE FCC Notice to U. S. Users This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. Select Side to display the photos and photo numbers. Effect In ON mode, press the SETUP button to enter the main menu, then press the UP or DOWN buttons to select Effect. Select ON, and the picture will play in effect. (OFF will stop the function. ) Contrast In ON mode, press the SETUP button to enter the main menu, then press the UP or DOWN buttons to select Contrast (01-10). Press the SETUP button to enter. Light In ON mode, press the SETUP button to enter the main menu, then press the UP or DOWN buttons to select Light (01-10). Press the SETUP button to enter. - 11 - www. jWIN. com Digital Photo Frame V11M11_IM_EN_03212008 OPERATIONAL INSTRUCTIONS Info Display information on firmware version, memory status. Exit Exit from the main menu. Resetting To Reset, insert a pin or paper clip in the RESET pinhole. Using the Digital Photo Frame Tool Insert CD-ROM (included) to install program software. Connect the device to a PC using the USB cable (included). Select Update and "USB Connect" will display on the screen. Open the Digital Photo Frame Tool for the following image. C A G D B - 12 - E F www. jWIN. com Digital Photo Frame V11M11_IM_EN_03212008 OPERATIONAL INSTRUCTIONS Photo Frame Tool-continued Interface instruction (see image on previous page) A. Displays the images selected in a window. Download Window - Displays the images which will be downloaded to device. Displays the number of the images in download window/the number of the images in device/the total number of the images able to be stored in device. [. . . ] Once all pictures for download are placed in the Download Window, click "Transfer, " to begin downloading. - 13 - www. jWIN. com Digital Photo Frame V11M11_IM_EN_03212008 OPERATIONAL INSTRUCTIONS Photo Frame Tool-continued Menu instruction Transfer: Append the images in download window to the device. Overwrite: Overwrite the device with the images in download window. · Revert: Returns adjusted image to original form. · Zoom +: Zoom in · Zoom -: Zoom out · Rotate right: Rotates pictures 90º to the right · Rotate left: Rotates pictures 90º to the left · Rotate 180: Rotates pictures 180º. [. . . ]