User manual JWIN JT-P10

[. . . ] MODE Button IMPORTANT NOTES: To operate this unit, you must have caller ID service setup with your local telephone company. Some functions such as "caller name indication" and "message waiting indication" will only operate if such services are included in the user's caller I. D. program with the local telephone company. SET-UP In order to operate this caller ID unit, you must set up the unit and preset information as follows: 1. [. . . ] CALL REVIEW - Viewing the Caller ID List · You must wait 2 or more rings to receive Caller ID data. · This unit can store up to 99 calls received. · The default display will show the present time, date, total number of calls and total number of new calls received that have not been reviewed yet. 12:24 PM 1/01 10 CALL 2 NEW ONE-TOUCH DISPLAYED NUMBER DIALING -Calling a Number From the Caller ID List · Press [UP] or [DOWN] to display the desired number. · Pick up your telephone handset or press the speakerphone button. · Press the [DIAL] button on the Caller ID to automatically dial the number displayed. CALL FILTER · Allows you to block out unwanted phone calls and set distinctive ringing for preferred calls. This feature operates by filtering out all phone calls during a specified time interval, except specific calls coming from a preferred group, either "NORM" or "VIP" · Turn the telephone ringer switch to the "off" position. 00:00 PM 1/01 FILTER ST TIME 00:00 PM 1/01 FILTER END TIME · · Press [DEL/STO] to set the desired group for the displayed number. To completely deactivate CALL FILTER, press the [FILTER] button again. The "FILTER" icon will be removed from the display panel. Note: New incoming calls that have not been manually designated in a filter group will automatically be grouped under "NORM" and will beep twice when the call is received. To check the status of grouped calls, press the [MODE] button. When the filter is turned off, be sure to return the telephone ringer back to the "on" position in order for the telephone to ring. VOICE MESSAGE INDICATOR · An envelope icon with the "MSG" string indicates voice mail was received in your voice mail service (if available). Contact your telephone company to obtain voice-mail service. LOW BATTERY INDICATOR · When a battery icon appears on the display screen, it indicates that battery power is low and needs to be replaced immediately. This icon will disappear once new batteries are installed. LCD SCREEN INDICATIONS · · · Press [UP] or [DOWN] to display and search through the memory. The most recent call received will appear first. "END OF RCV" will appear on the screen to indicate the end of numbers stored in memory. If the call received is in your area code, the area code number will not appear on the screen. · · Press the [FILTER] button once. [. . . ] Numbers set at "VIP" will beep four times. Numbers set at "REJ" refers to unwelcome calls. A "REJ" number will still be displayed on the screen but will not sound any beep. Press [UP] or [DOWN] to select the desired group. 1. [. . . ]