User manual JWIN JX-CD910 Instruction Manual

[. . . ] PORTABLE COMPACT DISC / MP3 PLAYER WITH ANTI-SHOCK 120SEC. INSTRUCTION MANUAL PLEASE READ CAREFULLY BEFORE USING YOUR UNIT MODEL: JX-CD910 LOCATION OF CONTROLS CD MODE BUTTON CD SKIP ( DC IN 4. 5V ADAPTER JACK (not include) ) BUTTON ESP/DIR NEXT PROGRAM BUTTON LCD (Liquid Crystal Display) STOP BUTTON (power off) HOLD SWITCH PLAY/PAUSE (power on) BATTERY DOOR LINE OUT JACK DOOR OPEN BASS BOOST SWITCH VOLUME CONTROL PHONES JACK CONTROL OPERATION AND FUNCTION POWER SUPPLY Your CD player requires 2 size "AA" alkaline batteries (not included), or use the AC adapter (not included) AC ADAPTER OPERATION Plug one end of the AC adapter into the DC 4. 5V jack, then plug the other end into AC wall outlet. PRECAUTIONS ON USING THE AC ADAPTER Put in correct specs for AC adapter. Please make sure you purchase the correct AC adapter. Use of an incorrect AC adaptor will damage the unit. Don't touch the AC adapter with wet hands. [. . . ] ) while playing, it will scan the current play· If you press and hold the skip button ( ON OFF ing track backwards at high speed. BASS BOOST BASS BOOST Use the Bass Boost function to increase the bass output when listening with headphones. During bass boost on setting, sometimes, you may hear some distortion, adjust the volume control to a lower level when using the bass boost feature. PROGRAMMED PLAY The tracks on the disc can be programmed for play in any order. (Up to 64 tracks can be programmed. ) E. 3 NOTE: Programming is possible in the STOP mode. Press the PROGRAM button in the STOP MODE. "00P-01" appears in the display. Select the first track to be programmed using 3. Press the PROGRAM button again to enter the track selected in to the memory. Repeat steps 2 to 3 to Program other tracks till you finish. Press the PLAY/PAUSE button to start play according to your order. The play stops automatically when all programmed tracks have been played. Note: In program mode, you can use the repeat and intro play mode. But you can't use random play mode in order to use this function, you have to clear the memory. But if you have directory in your disc you have to select directory and track both. Press the PROGRAM button in the STOP mode. Then "00 00P-01" appears in the display and first `00 (DIRECTORY NO)" is blinking. Press PROGRAM button again then second "00P(TRACK NO)" is blinking. Press PROGRAM button again then first song you wanted is entered in the memory. You can program up to 64 songs with above method. THE HOLD FUNCTION It is useful during playing, the function will lock the key on the panel to protect the mistake in the Playing. During playing slide the HOLD switch to "ON" position, the "HOLD" will appear in the display, the key on the panel will be locked, the panel key is disabled. Slide the HOLD Switch to "OFF" position to stop the function. THE CD MODE BUTTON This button can be pressed during play to accomplish many different kinds of play. In CD playing mode: In MP3 playing mode: Once for single track repeat. 6 times for return to normal play. SINGLE TRACK REPEAT Press the CD Mode button once during play, and the " " will appear in the display. [. . . ] 20Hz-20KHz below measure limits 44. 1KHz 1-bit CIRC optical 3-beam semiconductor laser (780 nM wavelength) GENERAL Power supply DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3V using two "AA" batteries AC/DC adaptor 220V - 4. 5V Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138mm(W)x138mm(D)x29. 5mm(H) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 grams E. 6 TROUBLE SHOOTING GUIDE SYMPTOM CAUSE Dead or weak batteries. SOLUTION Replace both batteries. [. . . ]