User manual JWIN JX-CD988

[. . . ] It is further agreed that jWIN will cover the cost to repair or replace damaged " PARTS" only for a total period of " One Year " from date of original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, improper application, accident, acts of God, or attempted repair by an unauthorized service agent. To obtain factory service please contact jWIN Electronics for Merchandise Return Authorization (MRA) number by sending a self addressed stamped envelope to the address below. The original purchaser MUST present a sales receipt / proof of purchase indicating date of purchase, amount plaid, and place of purchase. [. . . ] Traffic safety: Do not use while operating a motorized vehicle. It may create a traffic hazard and it's illegal in may areas. You should use extreme caution or temporarily discontinue use in potentially hazardous situations. Even if your headset is an open-air type designed to let you hear outside sounds, don't turn up the volume so high that you can't hear what's around you. 5 6 CHARGING AND USE OF RECHARGEABLE BATTERIES Rechargeable Battery Operation This unit can fully recharge the specified rechargeable battery, in approximately 15 hours. The rechargeable batteries (NOT supplied) should be recharged before they are used form the first time because they are low in power or if they have not been used for a long period (over 60 days) 1. Open the battery compartment cover and insert two of the recommended rechargeable batteries, matching polarity. (1. 2V 650mA) ALL BATTERIES MUST BE OF RECHARGEABLE NICKEL-CADMIUM TYPE, OTHERWISE THE BATTERIES MAY EXPLODE OR LEAK. Plug in the AC adaptor and set the Recharge switch to ON position to start charging. During charging the RED LED charge indicator will illuminate. USE ONLY THE AC ADAPTOR SUPPLIED WITH THE SET FOR CHARGING. Please unplug the AC adaptor and switch the Recharge switch to the OFF position. To clean the CD, wipe it in a straight line from the center toward the edge using a soft, lint-free cloth. Never write on a CD or attach a sticker to it. The lens may cloud over when the unit is moved suddenly from cold to warm surroundings. Leave the CD player in a warm environment until the moisture evaporates. Select and store all desired tracks in this way. * Press one more ENTER button to select the programming. Press PLAY button to start playback of your selected tracks. If you press STOP button during the program playback, it will go back to normal stop position. You can review the program by pressing SKIP button when playback is stopped and then press PROGRAM button. The display shows all stored tracks in sequence. 2 3 4 · · Erasing the program If necessary, press STOP button to stop playback. Note: The program will also be erased if you interrupt the power supply, open the CD lid, or the unit is switched off automatically. Searching for a passage during playback 1 Press and hold the SKIP+ / SEARCH or SKIP- / SEARCH button to find a particular passage in a backward or forward direction. [. . . ] If you are unable to solve a problem by following these hints, consult your dealer or service center. Check point Treatment Batteries Are the batteries inserted Insert batteries in correctly. Connect the adapter securely Is the power adapter Connect the power adapter properly. In-car use Cigarette lighter is not Switch on ignition or insert batteries. [. . . ]