User manual KANGURU MEDIA X-CHANGE PRO

[. . . ] Kanguru Media X-Change Pro USER'S GUIDE Copyright 2005, All Rights Reserved. -1- Kanguru Media X-Change Pro FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] A 100% message will indicate the transfer is complete. You will then be asked if you would like to verify the transfer. Press OK to verify, or Esc to skip this process. The files have now been transferred from your flash card to the internal hard drive in the Kanguru Media X-Change. To view or transfer the file on a PC, you will need to connect it using the included USB2. 0 cable. Please see the Downloading Files to a PC for detailed instructions. Important Notes: · The Kanguru Media X-Change Pro must be charged for 4 hours before using for the first time. · Do not attempt to copy more than 1 flash card at a time to the Media XChange Pro. · All files transferred are stored onto the hard drive in folder numerically ordered. Each of these drives can be accessed at anytime without any proprietary software. · The Kanguru Media X-Change Pro can be charge via your USB cable. You must have the drive in the locked position to do so. - 11 - Kanguru Media X-Change Pro 5. Install the drivers if they are required for your operating system. Connect the power cable to the back of the device. Press and hold the power button for 2 seconds to turn on the device. Connect the included USB2. 0 cable to the Kanguru Media X-Change Pro and then to your PC. Your system should find the new hardware automatically. You should now find 3 new drives available under "My Computer". To download files that you have transferred to the Media X-Change Pro you will need to locate the drive that represents the internal drive of the Media X-Change Pro. Open the drive and copy the content to the location of your choice. External Card Reader You can also use the Media X-Change Pro as an external card reader. To do so, please follow these instructions. [. . . ] Press the OK button, and "PRESET" will appear in the display. Use the left or right button to find the desired preset you want to delete. Press and hold the COPY button for 2 seconds to remove the preset. - 16 - Kanguru Media X-Change Pro 8. Voice Recording Start Voice Recording 1. [. . . ]