User manual KARCHER SC3

[. . . ] EN 5 5 5 6 6 7 8 9 9 10 Warranty The warranty terms published by the relevant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. (See address on the reverse) Safety Devices ṇ CAUTION Safety devices protect the user and must not be modified or bypassed. [. . . ] σ Insert the mains plug into a socket. σ Press the ON switch to turn on the appliance. σ The device is ready for use after approx. Note During the first steaming after removal and reinserting the cartridge the blast of steam can still be a little weak. The device requires a short break-in period, as the cartridge has to be filled with water first. This is why the steam discharge is unsteady at first and single water drops may exit. The amount of escaping steam increases continuously until the maximum amount is reached after approx. Refilling Water In case of a water shortage in the water tank, the water shortage indicator light is continuously on. σ Fill the water reservoir The descaler cartridge remains fixated in the device. Turning Off the Appliance Illustration  Press the OFF switch to turn off the appliance. σ Disconnect the mains plug from the socket. Illustration  Push the steam switch until steam discharge stops. Now, the boiler of the appliance is unpressurized. σ Move the child protection unit toward the back (steam lever locked). ATTENTION If the device is not used for a longer period of time (approx. 2 months) , please empty the water tank. illustration  Completely empty the water tank to remove existing water. EN – 7 13 Storing the Appliance Illustration Illustration  Put the extension pipes into the large accessory compartments. σ Insert the manual nozzle and detail nozzle onto each extension pipe. σ Attach the big round brush to the small detail nozzle. σ Put the small round brush and nozzles into the medium accessory compartment. σ Hook the floor nozzle into the parking position. [. . . ] The device switches off automatically Operating time of the cartridge over  Insert new cartridge into the device. See Chapter "Insert new descaler cartridge". EN – 9 15 RESET button was not pushed after the replacement of the cartridge  Hold down the RESET button for 4 seconds after inserting the cartridge. Technical specifications Power connection Voltage Protection class Protective class Performance data Heating output Operating pressure max. [. . . ]