User manual KASPERSKY LAB KRYPTOSTORAGE 1.0

[. . . ] KASPERSKY LAB Kaspersky KryptoStorage 1. 0 KASPERSKY KRYPTOSTORAGE 1. 0 User Guide Kaspersky Lab http://www. kaspersky. com Revision date: December, 2009 Contents CHAPTER 1. KASPERSKY KRYPTOSTORAGE OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Components of Kaspersky KryptoStorage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Protected Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select a mount point for the protected container. A mount point can be a logical disk (you can specify any free character of volume). Specify the parameters for attaching the container (grayed out if the container is not formatted yet): Mount in read-only mode. If the check-box is selected, all contents of the protected container are available only for reading. Adding or deleting data are not permitted. Note: The check-box is selected automatically and cannot be cleared if the container file has the Read-only attribute. Microsoft Windows 2000 does not support the Read-only mode for the NTFS-formatted protected containers. By default, a protected container can be attached as a removable disk (it is displayed in the list of removable devices in My Computer). However, if you clear the check-box, the protected container is attached as a fixed disk (it is displayed in the fixed disk list in My Computer). 30 Kaspersky KryptoStorage 1. 0 6. When the parameters are specified, click OK. If you attach a container which has not been formatted yet, you will be asked to format the container. Click Yes to start the formatting (see Item 4. 2. 5 on Page 30). 4. 2. 5. While formatting a disk to which a protected container is attached, all data inside the container is deleted. A user of a protected container can format an attached container in a way similar to formatting of a disk. The container is formatted using the standard tools of Microsoft Windows. When specifying parameters for formatting, consider the following: You should not attach the container in the read-only mode. To format a container to FAT or FAT32 in Microsoft Windows 2000, you must attach the container as a removable disk (when attaching the container, select the Mount as removable disk check box). If you do a full format, the file of a protected container will have the size specified while creating the container. If you do a quick format and select the FAT, FAT32 or exFAT file systems, the size of a protected container is minimized and it increases while you fill the container with data. If you do a quick format and select the NTFS file system, then the container file will have the size which you specify when creating the container. Note: Regardless of the formatting type, the size of a protected container which is mounted as a virtual disk is always equal to the size specified while creating the container. But the size of the container file can change. Attention!When using a container whose file size increases while you fill it with data, the volume containing the file of the protected container may run out of free space. [. . . ] For example, a Contributor might include the Program in a commercial product offering, Product X. That Contributor is then a Commercial Contributor. If that Commercial Contributor then makes performance claims, or offers warranties related to Product X, those performance claims and warranties are such Commercial Contributor's responsibility alone. Under this section, the Commercial Contributor would have to defend claims against the other Contributors related to those performance claims and warranties, and if a court requires any other Contributor to pay any damages as a result, the Commercial Contributor must pay those damages. 52 5. [. . . ]