User manual KATHREIN UFE 370 S

[. . . ] Operating Manual DVB-T Receiver UFE 370/S Order no. 20210052 2 Preface Preface Dear customer, This Operating Manual is intended to help you make the fullest use of the extensive range of functions offered by your new DVB-T receiver. We have tried to make the operating instructions as easy as possible to understand, and to keep them as concise as possible. The power switch is an environmentally friendly feature. [. . . ] Switch between Left/Right/Stereo sound using the SOUND button. Pause and Zoom With these buttons, the picture can be reduced in size or frozen. 14 Operation The Quality Button (Antenna Adjustment Help Function) In addition to displaying the reception strength and quality, the receiver also features an audible-signal help function to aid in adjusting the antenna: Adjust the receiver to the channel you want to receive and press the Quality button. As soon as the Quality display is activated, the receiver starts transmitting an audio signal at a frequency and repetition rate corresponding to the received signal. 15 Main menu Main menu Accessing the Main Menu (MENU Button) Press the MENU button to access the main menu. Select the submenu you want and press the OK button. Five submenus are available, as detailed below: 1) Timer Menu for preset programme recording or for automatic stop 2) Edit Channel List Sort, edit and delete channels 3) Edit Favourite List Organise channels (save, sort, edit and move) 4) Installation Menus to set up the antenna, the channels, the system menu and the parental control 5) Game Two games are available 16 Main menu Timer Setting (Automatic Programming) Note: The timer can be programmed either by way of the EPG (Electronic Programme Guide; see page 14) or as follows: The clock must be correctly set so the timer is ready for programming (see "Installation Menu/System Setup/Setting the Time"). Programme the event number (1 to 8), and activate the timer to enable programming. To select the date, press the OK button while in the "Date" field. A calendar appears, and you can then select the desired date using the / / buttons. => Alternatively: Move to the date field, select the day, month and year using the / buttons and key in the desired number using the number pad. Then select the start and end times and the number of the channel you want to record. To select the channel, press the OK button while in the "Channel" field. The channel list appears, and you can then select the channel you want using the / buttons. Press OK to confirm your selection and programme it into the timer. 17 Main menu Organising Channels and Favourites Sort: 1. Press the "Menu" button to access the receiver's menu. Choose "Edit Channel List" and press "OK" to confirm. Then select the channel you want to move using the cursor buttons (the channel is highlighted in yellow). Then press the red "Sort" button, followed by the yellow "Manual" button. Using the number pad on your remote, key in the number of the channel location you want to move to in the field underneath "Move to. . . " and confirm with "OK". Press the "Exit" button to quit the menu. Press "OK" to confirm the "Save sort order?" prompt. Key in the required PIN number using the number pad (the factory default is "0000"). Press the "Exit" button to quit the menu. Once you have confirmed a sort order you can no longer access the previous list. 18 Main menu Fav: 1. Press the "Menu" button to access the receiver's menu. [. . . ] The same display appears as during first installation. Important: The receiver is reset to its factory configuration. Any changes you may have made are lost. 26 Installation Menu Parental Control In this menu you can lock all the menus to prevent incorrect settings from accidentally being made. To activate the parental control you need to lock all the menus. [. . . ]