User manual KAWAI RV-4

[. . . ] The upper part is the freezer compartment intended for freezing fresh food and long-term storage of frozen food (up to one year, depending on the type of food). This compartment is labeled with four stars / asterisks. Important warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 A few tips on how to save power with your refrigerator-freezer combo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Appliance description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Do not forget to install the washers in the same way they were installed before disassembling (I). Install the covers A and B2 (cover B2 from the supplied bag). Replacing the handle: remove the hole plugs/covers, unscrew the screws and attach the handle to the opposite side. Insert the plugs into the holes on the opposite side. Save the elements B1, E1, and K1 in case you need them to change the door opening direction again at a later time. 305888 8 Appliance: HZZS2767 / HZZS2767F Tools required: socket wrench / spanner Nr. Use the slot screwdriver to remove the covers A and B. Undo / remove the hinges (C, D, E1) and the door (F, G), starting from the top and working your way down. Move the covers (H) to the opposite side. Upper compartment door (F): move the hinges (J) and the cover (M) to the opposite side. Lower compartment door (G): move the hinges (L) and the cover (M) to the opposite side. Start from the bottom and work your way up: attach and secure the lower hinge (E2) supplied in a bag; mount the door (G); fasten the hinge (D); mount the door (F); and fasten the hinge (C). Temperature setting for the refrigerator compartment also indirectly affects the temperature in the freezer compartment. 305888 12 Recommended food arrangement in the appliance Recommended food arrangement in the appliance Refrigerator compartment areas: - upper area: canned / preserved food, bread, wine, pastry, etc. - medium area: dairy products, ready-to-eat meals, deserts, juices, beer, cooked food, etc. - lower area: meat, meat produce, delicatessen, etc. Place the bottle rack in the appliance in such way to avoid obstruction of door closing by the length of the stacked bottles. Maximum load of the rack is 9 bottles of 0, 75 l, or 13 kg of total mass - see label at the right side of the interior of the appliance. · The bin / drawer at the bottom of the refrigerator compartment, under the glass shelf, is intended for storing fruit and vegetables. It provides humidity, thus preventing the food from dehydrating. The food must be appropriately packaged in order to prevent emitting or receiving smell and moisture. · Interior side of the refrigerator door is fitted with racks and bins intended for storing cheese, butter, eggs, yoghurt, and other smaller packages, tubes, cans, etc. The lower part of the door is fitted with a bottle rack. 305888 Food storage time Recommended storage time for the refrigerator Foodsmoked eggs, marinated meat, smoked meat cheese root vegetables butter deserts, fruit, ready-to-eat dishes, raw meat chunks fish, raw chopped meat, seafood Time up to 10 days up to 10 days up to 8 days up to 7 days up to 2 days up to 1 day Freezing fresh food and storing frozen food Freezer interior equipment · The shelves or bins on the interior side of the freezer door are suitable for storing frozen food that is often in use and hence requires quick access (ice creams, open vegetable packages, etc. ) Maximum quantity of fresh food that can be introduced into the appliance at a time is indicated on the label with basic information on the appliance. If this quantity is exceeded, freezing quality will deteriorate, as will the quality of the already frozen food. [. . . ] · Door is open too often or it is left open too long. · Door is not closed appropriately (there may be dirt between the door and the refrigerator, the door may be tilted, the seal should be checked, etc. ). · Too much fresh food was inserted. · Insufficient compressor and condenser cooling. [. . . ]