User manual KAZ HS-300

[. . . ] Do not place the fan or any parts near an open flame, cooking or other heating appliance. Do not operate the fan with a damaged cord or plug or if the product malfunctions, is dropped or damaged in any manner (see warranty). The use of attachments not recommended by the manufacturer may be hazardous. Do not hang or mount fan on a wall or ceiling. [. . . ] Your fan will now speed up and slow down to simulate outdoor air-flow. This feature can be used when your fan is on any speed setting. While using the fan in "BREEZE" mode, if you want to return to standard fan speed operation, press the "BREEZE" button once. Your fan will no longer cycle through its outdoor wind function. Timer: You can set your fan to conveniently turn itself off within two, four or eight hours. ⷠThis feature operates similar to the speed setting function. The time you have set will be displayed by the illuminated green light on the fan control panel. From Any Speed Setting: 1 press = 2 hours - light glows under 2 2 press = 4 hours - light glows under 4 3 press = 8 hours - light glows under 8 NOTE: If you shut off your fan in "Breeze" mode, the next time you turn your fan on it will be in "Breeze" Mode. If your fan shuts itself off as a result of "Timer" mode running out, the next time you turn your fan on it will default to the last used speed setting. You can use "BREEZE" mode and "TIMER" mode at the same time! ⷠIf you enjoy the soothing effects of "BREEZE" mode, but don't want to leave your fan running all night, from any speed setting simply select "BREEZE" then choose either 2, 4 or 8 hour time setting by pressing the "TIMER" button. ⷠAt the end of your time setting, the fan automatically turns itself off!REMOTE The remote control can be used up to 26 feet (8M) away from the fan. Be sure to point remote directly at the front of the fan to ensure a proper response. ⷠTo remove remote from the fan, slide it up and lift it off the front panel. To place remote back on the fan, slide it down the track around the fan's control panel and press gently to snap in place. You will hear a "beep" from the fan and see illuminated lights on the fan control panel while using the remote. This shows you that the remote is working. cLEANING AND STORAGE · Turn the fan to the off position and unplug the fan before cleaning. ⷠUse only a soft, damp cloth to gently wipe the fan clean. ⷠDO NOT immerse the fan in water and never allow water to drip into the motor housing. ⷠDO NOT use gasoline, paint thinner or other chemicals to clean the fan. [. . . ] This warranty applies only to the original purchaser of this product from the original date of purchase. At its option, Honeywell will repair or replace this product if it is found to be defective in material or workmanship. Defective product should be returned to the place of purchase in accordance with store policy. Thereafter, while within the warranty period defective product may be returned to Honeywell. [. . . ]