User manual KAZ HZ-690

[. . . ] To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. To disconnect the heater, first turn controls to the OFF position, then grip the plug and pull it from the wall outlet. [. . . ] To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns. Place the heater on a firm, level surface free from FIG. 9m) away from any wall or combustible material. With the selector knob set to a heat setting, turn the thermostat up (clockwise) until the heater restarts. CLEANING AND STORAGE We recommend that the heater be cleaned at least once a month and before off season storage. Use a dry cloth to clean the external surfaces of the heater. Clean your heater using the above mentioned steps, then pack the heater in its original container and store it in a cool dry place. â· This heater does not disassemble. 5 YEAR LIMITED WARRANTY You should first read all instructions before attempting to use this product. Com or complete and return the Customer Response Card within 7 days. This 5 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. [. . . ] Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. [. . . ]