User manual KAZ V934

[. . . ] Take the average of the two temperatures. This is considered your baby's normal body temperature. Any variation from it may indicate some sort of illness and you should consult your pediatrician. Note: This method produces a temperature approximately 1° higher than a temperature taken orally and 2° higher than a temperature taken under the arm. BEFORE USE Your VICKS® Baby Digital Thermometer is designed specifically for rectal use. [. . . ] Hold the thermometer in place during measurement. When the peak temperature is reached (usually 10 seconds) 10 beep signals will sound and the "°F" sign will stop flashing and the display light will come on. The temperature is now ready to read and will not change when the thermometer is removed. Turn the thermometer off by pressing the On/Off button. The display light will come on automatically to illuminate the last reading, then unit will power off. If you forget to turn it off, the thermometer will automatically turn off after approximately 9 minutes. Reminder: Wash the thermometer as recommended before placing it back in the storage case. See instructions below. UNDERARM (AXILLARY) USE 1. Place the thermometer under the arm so the tip is touching the skin and position the arm next to the body. With a young child, it is sometimes helpful to hug the child to keep their arm next to their body. This helps hold the thermometer steady and ensures that the room air does not affect the reading. When the peak temperature is reached (usually 60 seconds) 10 beep signals Fig. 3 will sound and the "°F" sign will stop flashing and the display light will come on. The temperature is now ready to read and will not change when the thermometer is removed. Turn the thermometer off by pressing the On/Off button. If you forget to turn it off, the thermometer will automatically turn off after approximately 9 minutes. Wash the thermometer as recommended. AUTOMATIC NIGHT GLOW DISPLAY The night glow display works automatically as you turn your Vicks thermometer on or off. When turned on, the display will glow for 5 seconds to illuminate the last temperature taken and the ready display. When you turn off the thermometer, the display will glow again, illuminating the temperature reading for 4 seconds. TO RECALL THE LAST TEMPERATURE When the thermometer is turned on, the last measured temperature will be shown on the LCD display with the letter "M" shown under the degree sign for approximately 2 seconds. CLEANING INSTRUCTIONS Clean the sensor area of the thermometer only by washing with soap and warm water or rubbing alcohol (70% isopropyl alcohol). DO NOT SUBMERGE THE READOUT DISPLAY OF THE THERMOMETER IN WATER. This will cause the thermometer to no longer function properly. This will cause the thermometer to no longer function and will void the warranty. [. . . ] Battery Life: LIFETIME WARRANTY Your VICKS® Baby Digital Thermometer is durable and manufactured for a lifetime of normal, household use. Following directions carefully will ensure years of dependable operation. If for any reason (other than misuse or normal battery replacement) you are dissatisfied with your VICKS® Baby Digital Thermometer, we will repair or replace it, at our option, free during your lifetime. If the thermometer does not function properly, first check the battery. [. . . ]