User manual KENMORE 625.345300

[. . . ] (see product data sheet) 125psi 100_F 1/2 gal/min 4 months or 250 gallons 1 year . . tastes, odors, and lead 2 INSTALL THE BATTERY Using a wide bladed screwdriver, or a dime, pry the top off of the filter cap at the slotted opening. Take the battery (included in the parts bag) and wipe clean with a cloth. Then, install in the cap as shown in FIG. [. . . ] Tighten securely, but do not overtighten and break the filter. IF YOU HAVE QUESTIONS, CALL TOLL FREE, 1-800-426-9345 continued 4 CONNECT THE FILTER TO A FAUCET 5. CHECK FOR LEAKS: Open the cold water faucet and adjust to a medium flow. Check for leaks around the collar and adaptors, and tighten if needed to stop the leak. CAUTION: Never direct hot water into the filter. Be sure the water diverter is closed when using hot water. PURGE FILTER CARTRIDGE: With the cold water faucet still open, turn the water diverter control on the fil ter, to route water through the filter cartridge (FIG. Allow wa ter to run through the filter for about 1/2 minute to purge small, harmless carbon particles from the cartridge. FIG. 4 collar gasket, 15/16" dia. WHAT YOUR DELUXE FAUCET FILTER WILL DO Activated carbon is a mineral having a FIG. 5 great ability to adsorb and hold tastes and odors. It is used to remove many different bad tastes and/or odors from drinking water. Some of these are chlorine, metallic, marshy or swampy, tastes and odors. COLD WATER IN The cartridge in your water filter is filled with a blend of activated carbon, and a special resin for removing LEAD from water. When the cold water faucet, and the filter water diverter control are opened, water is directed through the filter cartridge. You are provided with fresh tasting, clean smelling, reduced lead drinking water. A product data sheet is included that tells you what, and how much, the filter will remove from drinking water. unfiltered faucet water water not diverted through filter filter COLD WATER IN FILTERED WATER OUT control water diverted through filter water diverted through filter 5 Note: Be cartridge as instructed in step 6, page 5. JOpen the cold (never use hot) water faucet and adjust to a medium flow. USING YOUR FAUCET WATER FILTER FIG. 6 sure to purge a new filter CAUTION: Never direct hot water into the filter. Be sure the water diverter is closed when using hot water. JHold a glass, cup, pitcher, or other container under the filtered water outlet. JOpen the water diverter control on the filter, and catch the water in the container. [. . . ] The filtered water is now ready to use. cap filter cartridge base o­ring seal water diverter control (closed) TROUBLESHOOTING CHECK LIST Filtered water has bad taste and/or odor. Fine, black particles in filtered water. Electronic indicator flashing ``filter change'' ­ The filter cartridge needs replacing. ­ Water diverter control not turned to direct water into the filter. [. . . ]