Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KENMORE 625.348460. We hope that this KENMORE 625.348460 user guide will be useful to you.
Lastmanuals help download the user guide KENMORE 625.348460.
Detailed instructions for use are in the User's Guide.
[. . . ] 625. 348460
Caution: Read and Follow All Safety Rules and Operating Instructions Before First Use of This Product.
microMAX Water Softener
x Warranty x Start Up / Setting Timer x How It Works
If you have questions when installing, operating or maintaining your softener, and when setting the timer, call this tollfree number. . .
x Care Of x Specifications x Repair Parts
Use plastic bag and tie provided, to hang manuals nearby the softener for future reference.
18004269345 SAVE THIS MANUAL
Sears, Roebuck and Co. , Hoffman Estates, IL 60179 USA
PRINTED IN U. S. A.
WARRANTY
SEARS RESIDENTIAL WATER SOFTENER
FULL ONE YEAR WARRANTY ON WATER SOFTENER
For one year from the date of purchase, when this water softener is installed and maintained in accordance with our instructions, Sears will repair, free of charge, defects in material or workmanship in this water softener.
FULL TEN YEAR WARRANTY AGAINST LEAKS
For ten years from the date of purchase, Sears will furnish and install a new current model water softener tank or salt storage drum, free of charge, if either the tank or drum develop a leak. TO OBTAIN WARRANTY SERVICE, SIMPLY CONTACT THE NEAREST SEARS SERVICE CENTER THROUGHOUT THE UNITED STATES. This warranty applies only while this product is in use in the United States. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Sears, Roebuck and Co. , D/817 WA, Hoffman Estates, IL 60179 If you want your water softener professionally installed, talk to your Sears Salesman. [. . . ] This small unit moves brine from the salt storage tank to the resin tank during regeneration. If it becomes plugged with sand, silt, dirt, etc. , the softener will not work and you will get hard water. To get to the nozzle and venturi, remove the softener top cover. Be sure the softener is in service cycle (no water pressure at nozzle and venturi), then turn off the cap from the nozzle and venturi housing. Lift out the screen support and screen, then the nozzle and venturi. Wash and rinse the parts in warm water until clean. If needed, use a small brush to remove iron or dirt. Also check and clean the gasket and small screen. Carefully replace all parts in the correct order. Lubricate the o ring seal with silicone grease or Vaseline and place in position. Install and tighten the cap, BY HAND ONLY. DO NOT OVER TIGHT EN AND BREAK THE CAP OR HOUSING.
FIG. 10 CLEANING THE NOZZLE & VENTURI
Screen
*INSTALL WITH NUMBERED SIDE UP, CONCAVE SIDE DOWN.
IRON FROM THE RESIN BED Your water softener takes hardness minerals (calcium and magnesium) out of the water. Also, it can control some clear water" iron. See maximum allowed in the specifications on page 18. With clear water iron, water from a faucet is clear when first put into a glass. After 15 to 30 minutes, the water begins to cloud or turn rust colored. A water softener WILL NOT remove any iron which makes the water cloudy or rusty as it comes from the faucet (called red water iron). To take red water iron out of water, or over the maximum of clear
water iron, an iron filter or other equipment is needed. Your local Sears store has trained people to help you with iron water problems. If your water supply has clear water iron, even though less than the maximum allowed, regular resin bed cleaning is needed. If iron shows up in the soft water before 6 months, clean more often. [. . . ] INFORMATION
27
SECTION 6
24
REPAIR PARTS
SEARS WATER SOFTENER MODEL NO. NUMBER 1 2
VALVE ASSEMBLY (see page 30)
DESCRIPTION Cover (main) Salt Hole Cover Wire Harness (switch) Power Cord (transformer) Timer Repl. (PWA) Face Plate (also order decal below) Face Plate Decal Rim Brinewell Cover Wing Nut, 1/4" Brinewell Salt Storage Tank Plastic Screw, 1/4" x 5/8" Hose ClampB Hose AdaptorB GrommetB Brine Valve Assem. ( see page 29) Resin Tank Assembly (complete) Oring, 11/16" x 11/4" Oring, 13/16" x 11/16" Filter Screen Vapor Barrier Clamp Section (2 req. ) Clamp Retainer (2 req. ) Transformer, 24V10VAB Installation Manual Owners Manual
7137604 7137612 7118333 7084330 7152913 7137620 7145568 7137599 7137727 7082150 7106962 7152963 7143956 0900431 1103200 9003500 7145500 7152947 0900039 0900215 7150327 7141001 7088041 7088033 7095373 7141417 7145445
3 4 5
23 22 21
6 7 8 9 10
20 19 18 17
11 12 13 14 15 16 17
12
18 19 20 21 22 23 24
not illustrated B Included in parts bag. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KENMORE 625.348460
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KENMORE 625.348460 will begin.