User manual KENMORE 625.394260

[. . . ] OWNER'S MANUAL E L I T E Water Softeners With High Performance Valve MODEL NOS. IntelliSoft 420 Series 625. 384260 IntelliSoft 420 Series 625. 394260 Caution: Read and follow all safety rules and operating instructions before first use of this product. Questions ?Visit www. KenmoreWater. com or call toll free 1-800-426-9345 (M - F, 7AM - 8 PM CST) Repair or Parts ?Call toll free 1-800-366-7278 See back cover for other Sears service numbers. [. . . ] Move the black bar to Language, and press SELECT. Move black bar over your choice and press SELECT. NOTE: If Language has been mistakenly changed, press SELECT button until you see English, Español and Français in the display. The maximum number of presses is six and it could be fewer depending on which screen was displayed. Use the UP or DOWN arrows to place the black bar over language desired. Press SELECT twice to return to normal operating screen. Present Time changes the current time of the faceplate. Be sure to have correct AM or PM time, or softener will recharge at the wrong time of day. One press of the UP or DOWN button changes the time by one minute intervals. Press and hold either the UP or DOWN arrow, to scroll through the time at a faster rate. Pressing the UP or DOWN button changes the number by one. Once correct number is shown, press SELECT to change to new setting. Recharge Time is the when the softener is scheduled to start a recharge. Using the UP or DOWN arrows changes the time by one hour increments. When the desired time is shown, press SELECT to change and return to Settings menu. Language English Español Français bd CHANGE SELECT FIG. 37 Present Time: 11:36 AM bd CHANGE SELECT FIG. 38 Hardness: 25 Grains bd CHANGE SELECT FIG. 39 Recharge Time: AM 2:00 bd CHANGE SELECT FIG. 40 OPTIONS Salt Options QuickCharge Rinse Option Recharge Count Back Exit CHANGE bd OPTIONS: Choices are Salt Options, QuickCharge, Rinse Option and Recharge Count. Salt Options has several selections: When salt is added to tank, Salt Level must be changed to the new salt level in the tank. Observe the bars and the corresponding number value in the display. This number must match the number on the brine tube in the brine tank that the salt level is closest to. [. . . ] 11 & 12) O-Ring, 11/16" x 1-1/32" Light Asm. Ultra Cleansing Screen Brinewell Cover, with decal Wing Nut, 1/4" O-Ring, 1/4" x 1/2" Brinewell Decal, Salt Level Salt Storage Drum Plastic Screw, 1/4" x 5/8" Tube Clamp Tube Adaptor Grommet Brine Valve Asm (see pages 48 & 49 also) Replacement Distributor Resin Resin Tank (includes key no. 26) O-Ring, 2-3/4" x 3" Top Distributor O-Ring, 13/16" x 1-1/16" O-Ring, 2-7/8" x 3-1/4" Resin Bed Cleaner Parts Bag (includes parts marked with a pages 47, 49 & 51). Call The Kenmore Water Line 1-800-426-9345 47 Exploded View Kenmore MODEL Nos. [. . . ]