User manual KENWOOD C-V751

[. . . ] AV CONTROL CENTER C-V751 INSTRUCTION MANUAL KENWOOD CORPORATION B60-4341-10 01 CH (T, X) AP 9904 Before applying power Units are designed for operation as follows. Caution : Read this page carefully toBefore applying power ensure safe operation. 2 Europe and U. K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V only For the United Kingdom Factory fitted moulded mains plug 1. [. . . ] or right arrow 4 Touch the left next to a tone setting (treble or bass) to between the adjust it. A readout arrows shows the current setting. The display on the GRC disappears if no operation on the GRC has been pressed for about 7 seconds. Bass tone level FM AM MW LW BAss _2 AUTO SOUND DIG DTS DOLBY DIG PRO LOGIC D MHz SLEEP KHz TIMER 1 2 TA ÷ The level can be adjusted between -10 and +10 in step of 2. Treble tone level EREO UNED F M TP A M NEWS MW LIP LW ÷ The level can be adjusted between -10 and +10 in step of 2. TREB +2 AUTO SOUND DTS DOLBY PRO LOGIC MHz SLEEP KHz TIMER 1 2 2 Adjust the volume levels for the speakers. (In other modes than stereo) 1 Select the "SP Level" icon. (Select the icon) ÷ This adjustment is not available when DVD 6ch INPUT is selected. To increase To decrease Continued to next page Sound adjustment 30 2 Adjust the center speaker level. "C" (Select the icon) TEREO TUNED F M N TP A M NEWS MW CLIP LW Main unit center speaker level Cch +2 AUTO SOUND DTS DOLBY PRO LOGIC MHz SLEEP KHz TIMER 1 2 3 Adjust to the desired level by pressing keys and 4 Adjust the surround speaker level. "LS/ RS" (Select the icon) ÷ The level can be adjusted between -10 and +10 in step of 1. Surround speaker level TEREO TUNED F M N TP A M NEWS MW CLIP LW or s +1/ +1 AUTO SOUND D DTS DOLBY D PRO LOGIC MHz SLEEP KHz TIMER 1 2 T 5 Adjust to the desired level by pressing keys and ÷ The level can be adjusted between -10 and +10 in step of 1. 6 Adjust the subwoofer level. "SW" (Select the icon) TEREO TUNED F M N TP A M NEWS MW CLIP LW Sub woofer level sW + 1) AUTO SOUND DTS DOLBY PRO LOGIC MHz SLEEP KHz TIMER 1 2 ÷ The level can be adjusted between -10 and +10 in steps of 1. 7 Adjust to the desired level by pressing and keys ÷ The volume levels adjusted here are just temporary; they return to the levels originally set in the setup operation when the power is turned off, the input selector is switched or the setup operation is started. MIDNIGHT function 1 Select the "Midnight" icon. MIDNIGHT function Any time you don't want to experience the loud and soft volume extremes of recorded sound (for example, late at night), use MIDNIGHT function to reduce volume extremes. This feature keeps loud, dramatic sound from being too loud (perhaps disturbing family members or neighbors) while ensuring that you can still hear whispered dialog or other soft sounds. Midnight function only works if you are listening to a Dolby Digital program that has been encorded with special compression data. 2 Select the MIDNIGHT mode. Each press changes the mode. For quietest balancing (the least difference between the loudest and quietest sound). 3 OFF Recording When recording sound with a recorder component of KENWOOD, synchro recording is possible by setting the INPUT SELECTOR to select MD or TAPE 1 according to the connected component. Sound may not be reproduced when the input signal and LISTEN MODE are selected improperly. How to select the digital input, analog input and LISTEN E MODE. Recording 31 Recording an analog input source 1 To record a music source Main unit GRC 1 Select the "edit" icon in the fixed segment screen. (Select the icon) Main unit Each press switches the indication. 1 TUNER (Frequency display) 2 CD 3 MD/TAPE 1 4 DVD/DVD 6ch INPUT 5 VIDEO 1 6 VIDEO 2 2 Select the source to be recorded. Select an input source other than MD/TAPE 1. e di t GRC Select the icon of the source to be played. INPUT ÷ For the recording using a cassette deck or MD recorder, read the instruction manual of the cassette deck or MD recorder. 3 Select the "Distination". 4 Press the "Src. " icon. Continued to next page Recording 32 2 Select the ANALOG input mode. Main unit INPUT MODE Main unit Each press switches the indication. 1 DIGITAL AUTO 2 DIGITAL MANUAL 3 ANALOG GRC Select the icon of the source to be played. ÷ The switching is not available when the DVD 6ch INPUT is selected. ÷ "3 ANALOG" cannot be selected when the input signal is the DTS signal. or switches the display between "Source" ÷ Each press of and "Destination" alternately. ÷ The input mode cannot be changed during recording. GRC 1 Set the input mode to ANALOG. (Select the icon) · 3 Start recording. Main unit GRC 1 Play the source to be recorded. ÷ Setting 1 is not necessary unless when the CD or DVD source is selected. 2 Press the "Dst. " icon. 3 Press the record key to enter record-pause mode. 4 Press the "Src. " icon. 5 Pause the playing the source from beginning of the track being recorded. ÷ The synchro recording function is not available when the playback source is the DVD player. 6 Play the source and start recording. Recording When recording sound with a recorder component of KENWOOD, synchro recording is possible by setting the INPUT SELECTOR to select MD or TAPE 1 according to the connected component. [. . . ] 5. 2 kg (11. 4 lb) Weight (net) (For Australia) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. 1 kg (11. 2 lb) Video section VIDEO inputs / outputs (composite) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 Digital section Sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 kHz, 44. 1 kHz, 48 kHz Digital input (coaxial) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]