User manual KENWOOD CAW-COMMI1

[. . . ] Also note that a CD-R or CD-RW disc which has not been finalized cannot be played back. Sleep timer : This timer turns the unit off automatically when the set time has elapsed. It is convenient for example, falling asleep while listening to music in the night time, etc. This unit is equipped with a demonstration function (only display). [. . . ] Each press of the TIME DISPLAY key changes the displayed contents. Only from the remote control unit Only time information 1 and 2 can be displayed during single-track repeated playback or random playback. In the program mode, display 3 shows the elapsed time of the entire program and display 4 shows the remaining time of the entire program. When the displayed time is 1, 000 minutes or more, the display shows "­ ­ : ­ ­". Each time the DISPLAY key is pressed, the content of the display switches. Only from the remote control unit 1 CD player time indication 2 Title indication (Only for CDs that support CD-TEXT) 3 Time indication With ordinary CDs (discs that do not support CDTEXT), each time the DISPLAY key is pressed, the content of the display switches between 1 and 3. The title indication is the disc title when playback is stopped, whereas the track title is displayed during playback. When "CHECK DISC" appears on the display, the content of the display cannot be switched. This component system can display the text information of CD-TEXT discs that contain titles in alphabet or numerals. If CD is selected as the input source and a CD-TEXT disc is loaded into the CD player, the disc's title appears on the display. If the title is too long to fit in the display, the title is scrolled across the display. The desired program type can be selected with the 4 or ¢ key from 29 types. Press the key and release it when the desired type is displayed. When searching for a Rock Music broadcast Display while the tuner is searching. No sound is heard while "PTY" is blinking. If a program of the desired type cannot be found, "NO PROGRAM" is displayed, then after several seconds the display returns to the original display. If a program of the desired type is found, that program is received and the program type name display changes to the station name display. This adjusts the input level for the external equipment (video deck etc. Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD. 1 Press the mode key to get the setting mode. Then, use the 4 and ¢ keys to select "AUX INPUT" and press the enter/demo key. Each time the 4 or ¢ key is pressed, the display switches as follows. [. . . ] ) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction. When a disc is not to be played for a long period of time, remove it from the player and store it in its case. This component stereo optical scans CDs to read content, therefore transparent CDs cannot be used with it. What seems to be a malfunction is not always so. [. . . ]