User manual KENWOOD CAW-FT7290

[. . . ] · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. [. . . ] The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. · When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable ('Manual Clock Adjustment' etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "Menu" is displayed. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the "Beep" display. In Standby mode Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. 3 Set the menu item Press the [4] or [¢] button. Example: When "Beep" is selected, each time the button is pressed it switches "Beep ON" or "Beep OFF". You can continue by returning to step 2 and setting other items. · When the Security Code function is activated it can't be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 24 | English 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "Menu" is displayed, "Security" is displayed. Number of times the incorrect code was input 1 2 3 4 Input prohibited time -- 5 minutes 1 hour 24 hours 3 Enter Security Code mode Press the [4] or [¢] button for at least 1 second. When "Enter" is displayed, "CODE" is displayed. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Dimmer ON" "Dimmer OFF" Setting The display dims. The display doesn't dim. In External disc, or Auxiliary input source Dual Zone System Makes the sound different for the front channel and rear channel. Display "Zone 2 OFF" "Zone 2 ON" Setting The front and rear are the same source sound. The front and rear are the different source sound. System Q Setting Setting whether the display indicates the System Q factors (Bass center frequency, Bass Q factor, Bass extend, Middle center frequency, Middle Q factor, and Treble center frequency) in Audio control. · When the Dual Zone System is on, there is only sound effect including Audio control for internal source. · When you set the Dual zone system to ON while the sub woofer preout is switched ON, the sound of the sub woofer preout isn't output. 26 | English When the Dual Zone System is OFF In Tuner mode Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. Display "Zone 2 Rear" "Zone 2 Front" Setting The front is this unit's internal source, and the rear is selected source sound. The rear is this unit's internal source, and the front is selected source sound. News Bulletin with Timeout Setting It switches automatically when a news bulletin starts even if the radio isn't being listened to. Also, the time interval when interrupt is prohibited can be set. Display and Setting "News OFF" "News 00min" "News 90min" . . . B. M. S. (Bass Management System) Adjust the bass boost level of the external amplifier using the main unit. Display "AMP Bass Flat" "AMP Bass +6" "AMP Bass +12" "AMP Bass +18" Setting Bass boost level is flat. [. . . ] The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. The disc can only be removed within 10 minutes of the ACC switch being turned OFF. [. . . ]