User manual KENWOOD CAW-RN1140

[. . . ] · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Notes Do not use this unit before canceling Demonstration mode This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to <Exit of the Demonstration Mode> (page 5). · The demonstration is an operation image. It may be different from actual operation. How to reset your unit · If you experience problems during installation, consult your Kenwood dealer. [. . . ] Refer to <Favorite Preset Memory Delete> (page 49). "Built in AMP" Selecting "OFF" turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. "ON"/ "OFF" "AV Out Set" Changes the iPod setting from AV Output to output-only terminal. "ON"/ "OFF" "System F/W Updates the firmware. The update information Update" will be posted on the following URL as necessary. www. kenwood. com/cs/ce/ ( : Factory setting) 3 4 Function of CAW-RN1140 Muting Volume upon Reception of Phone Call The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. The "CALL" display disappears and the audio system comes back ON. / · To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 76). 5 6 Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. Enter Audio Control mode Press the [Volume] knob. Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. Exit Audio Control mode Press the [MENU] button for at least 1 second. 2 3 4 5 "Supreme+" Remarks · DSP Set When "DSP Set" is set to "Bypass", the DSP function is disabled , and the colored items cannot be set. · HIGHWAY-SOUND Increases the volume of faintest sound being lost by road noises to make the sound more audible. Additionally, it accentuates bass sound being lost by road noises to make the bass sound more dynamic. · HIGHWAY-SOUND is not available in tuner source and HD Radio source. · Supreme+ (Supreme Plus) Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding. The bass and vocal sound that are cut off by encoding are supplemented for the reproduction of natural sound quality. Supplementing is optimized by compression format and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. [. . . ] Over Capacity: Recording or copying was canceled because internal memory space ran out while copying from USB device. Delete unnecessary files and record or copy once more. Copy Error: · An incompatible digital audio player was used. · Cannot copy because the USB device is not firmly inserted. [. . . ]