User manual KENWOOD CCD-900

[. . . ] Si desea obtener una descripción detallada de las operaciones, consulte el archivo PDF correspondiente incluido en el CD-ROM. © B62-2003-20 (W) 09 08 07 06 05 04 03 02 CONTROL PANEL INSTRUCTION MANUAL ENGLISH CCD-900 THANK YOU We are grateful you decided to purchase this CCD-900. FEATURES CCD-900 has the following main features: · Has a built-in TNC which conforms to the AX. 25protocol. With a portable computer, allows you to enjoy Packet operation quite easily. · Includes a program for dealing with data formats supported by Automatic Packet Reporting System (APRS®). · <CCD-900 + TM-V71> When the CCD-900 is connected to the TM-V71A/E, the available functions are the same as the TM-D710A/E. [. . . ] When the output level from CCD-900 (PDK PIN) changes: [Edit] - [Data Terminal] - [Output Level] - [PKD PIN (1200bps)]/ [PKD PIN (9600bps)] When the input level to CCD-900 (PR9 PIN) changes: [Edit] - [Data Terminal] - [Input Level] - [PR9 OUT (1200bps)]/ [PR9 OUT (9600bps)] To use the MCP-2A, you must use the PG-5G programming cable. · · · 5 GETTING ACQUAINTED OPERATION PANEL (FRONT) <CCD-900 + TM-V71> IN NORMALMODE q CALL Press [CALL] to select the Call channel. w VFO Press [VFO] to enter VFO mode , then rotate the Tuning control to select an operating frequency. e MR Press [MR] to enter Memory Channel mode, then rotate the Tuning control to select a Memory channel. r Tuning Control Rotate to select an operating frequency or Memory channel, change the scan direction, etc. r Tuning Control Press the Tuning control to enter Menu mode. t F OFF Press [F OFF] to return Normal mode. y T. SEL While Tone, CTCSS, or DCS is ON, press [T. SEL] to enter CTCSS or DCS setup mode. u SHIFT Press [SHIFT] to enter Offset Direction selection mode. Each time you press [SHIFT], the offset direction toggles as follows: plus (+) direction ­> minus (­) direction ­> ­7. 6 MHz (with TM-V71(E) E type only) ­> OFF. i MUTE Press [MUTE] to turn the Mute function ON or OFF. o VISUAL Press [VISUAL] to turn the Visual Scan function ON and OFF. Blinks when the temperature protection circuit (transmit power save) turns on. Performs as an S meter when receiving a signal and displays the selected power level while transmitting. Appears while transmitting. Appears while using the External data band. Appears while using the Internal data band. Appears when the data terminal is set as 9600 bps. Appears while making a continuous recording. Appears when the Key Lock function is ON. Displays the PM channel number. Appears when Weather Alert is ON. (with TM-V71(A) K type only) Appears when a message is received. Appears when the Beacon type is set to "APRS". Appears when the Beacon type is set to "NAVITRA. Appears when the packet transfer rate is set to 1200 bps. [. . . ] Available only for TM-V71(A) K type models. Available only for TM-V71(A/E) K and E types models. Available only for TM-V71(E) {version 2. 1 later}. Note: The default settings are subject to change. CHARACTER ENTRY Certain menus require you to enter characters, such as the power on message and memory names. When character entry is required, a cursor will appear on the display. [. . . ]