User manual KENWOOD CHEF XL KPL9000S

[. . . ] L Never use an unauthorised attachment or more than one attachment at once. L Never exceed the quantities stated in the maximum capacity chart. L When using an attachment, read and follow the safety Instructions that are supplied with it. L Take care when lifting this appliance as it is heavy. [. . . ] Note: If the K-beater or Whisk are not picking up ingredients from the bottom of the bowl refer to the "Tool Adjustment" section. 4 Lift the mixer head slightly then turn the head-lift lever anti-clockwise and lower the mixer head until it locks. 6 To start the mixer press the green button. 7 Release the tool by turning clockwise to unlock from the tool socket and then remove. Mixing and scrape down the bowl with the spatula frequently. For best results when whisking use eggs at room temperature. Before whisking egg whites, make sure there is no grease or egg yolk on the whisk or bowl. Use cold ingredients for pastry unless your recipe says otherwise. Points for bread making Important · Never exceed the maximum capacities Stated - you may overload the machine. If you hear the machine labouring, switch Off, remove half the dough and do each half separately. The ingredients mix best if you put the liquid in first. Reconstituting): pour the warm water into the bowl. Then add the yeast and the sugar and leave to stand for about 10 minutes until frothy. Other types of yeast: follow the manufacturer's instructions. Put the dough into a greased polythene bag or a bowl covered with a tea towel. Then leave somewhere warm until doubled in size. Important Ensure that no bowl tools are fitted or stored in the bowl when using other outlets. Flour weight Flour weight (enriched with butter and eggs) Total weight Fruit cake mix (Creaming fat and sugar method) Then increase to speed `1' The tools are set to the correct height for the bowl supplied in the factory and should not require adjustment. However, if you wish to adjust the tool use the spanner provided. Then follow the instructions below: 1 Unplug the appliance. 2 Raise the mixer head and insert the Needs to be adjusted, raise the mixer head and remove the tool. Ideally the whisk and K-beater should be almost Touching the bottom of the bowl 6. [. . . ] Attachment must have the KAX twist connection system to fit the outlet. If you own attachments featuring the Bar Connection System you will need to use the KAT002ME adaptor to connect these to the Twist Connection System on your Kitchen Machine. The Kitchen Machine stops during operation. If the machine will not operate, remove some of the ingredients to reduce the load and restart. [. . . ]