User manual KENWOOD DPX-MP2100

[. . . ] DUAL DIN SIZED CD RECEIVER DPX-MP2100 INSTRUCTION MANUAL © B64-3612-00/00 (MW) B64-3612-00_00_M_English. Indd 1 06. 12. 22 1:31:56 PM Contents Safety precautions Notes General features Power Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Subwoofer Output TEL Mute Switching Display 3 4 5 Menu system Menu System Activating Security Code Deactivating Security Code Touch Sensor Tone Manual Clock Adjustment Display Illumination Control Dimmer Switching preout Built-in Amp Setting Supreme Setting B. M. S. Frequency Offset AMP Control CRSC (Clean Reception System Circuit) Auxiliary Input Display Setting Text Scroll Built-in Auxiliary input Setting CD Read Setting 16 Tuner/TV control features Tuning Tuning Mode Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting TV Tuning TV channel Preset Memory Preset TV Tuning Direct TV Tuning 10 Basic Operations of remote control 21 Accessories/ Installation Procedure 23 Connecting Wires to Terminals Installation Troubleshooting Guide Specifications 24 25 26 28 CD/Audio file/External disc control features 13 Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Music Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Folder Select Text/Title Scroll 2 | English B64-3612-00_00_M_English. Indd 2 06. 12. 22 1:31:57 PM Safety precautions 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • Mounting and wiring this product requires skills and experience. [. . . ] You can continue by returning to step 2 and setting other items. 16 | English B64-3612-00_00_M_English. Indd 16 06. 12. 22 1:32:05 PM ⁄ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. ⁄ • When the Security Code function is activated, "CODE SET" changes to "CODE CLR". • To deactivate the Security Code function, see the next section <Deactivating Security Code>. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. In Standby mode 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is also displayed. Deactivating Security Code To deactivate the Security Code function. 1 Select Security Code mode Push the Control knob towards up or down. Select the "CODE CLR" display. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 2 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 4 Select the digits to enter Push the Control knob towards right or left. 5 Select the Security Code numbers Push the Control knob towards up or down. 3 Select the digits to enter Push the Control knob towards right or left. 6 Repeat steps 4 and 5, and complete the Security Code. 4 Select the Security Code numbers Push the Control knob towards up or down. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 5 Repeat steps 3 and 4, and complete the Security Code. 6 Press the Control knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. 8 Do the step 4 through 7 operation, and reenter the Security Code. The Security Code function activates. ⁄ • If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code. ⁄ • If you enter the wrong Code in steps 4 through 6, repeat from step 4. In Standby mode Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. 2 Do the step 4 through 7 operation, and enter the Security Code. Now, you can use the unit. English | 17 B64-3612-00_00_M_English. Indd 17 06. 12. 22 1:32:06 PM Menu system In Standby mode In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards up or down. Select the "CLK ADJ" display. Dimmer Dimming this unit’s display automatically when the vehicle light switch is turned ON. Display "DIM AUTO" "DIM OFF" Setting The display dims. The display doesn’t dim. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards up or down. Adjust the minutes Push the Control knob towards right or left. In Standby mode Switching preout Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control. ) Display "SWPRE R" "SWPRE SW" Setting Rear preout. [. . . ] ☞ Clean the media, referring to the CD cleaning of the section on <Handling CDs> (page 4). ☞ Record the media again or use another media. 26 | English B64-3612-00_00_M_English. Indd 26 06. 12. 22 1:32:10 PM The messages shown below display your systems condition. EJECT: • No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. No disc has been loaded in the disc magazine. [. . . ]