User manual KENWOOD DVF-3400

[. . . ] DVD/VCD/CD PLAYER DVF-3400 INSTRUCTION MANUAL © B60-5680-08/00 (K, E, X) KW Before applying power Caution: Read this page carefully to ensure safe operation. Units are designed for operation as follows. U. S. A. , Canada and US-Military . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 110 - 240 V Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems) Products with the symbol (crossed- out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste by products. [. . . ] 2 Set Video Format according to the connected TV type. (Refer to "To select TV Type" on page 9. ) · If the video formats of the disc and TV do not match, press and hold [8] key for more than 5 seconds to be able to select a TV type (PAL, NTSC or AUTO). (No disc inserted) Note: When the power cord is plugged, wait for several seconds, and then switch the power on. 2 Use the Cursor up/down [5/] keys to select the desired option, then press the Cursor right [3] key to move to the second level. · The screen shows the current setting for the selected item, as well as alternate setting(s). 3 Use the Cursor up/down [5/] keys to select the second desired option, then press the Cursor right [3] key to move to the third level. 4 Use the Cursor up/down [5/] keys to select the desired setting, then press [ENTER] key to confirm your selection. 5 Press [SETUP] key or [£] key to exit the Setup menu. Set up menu By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 17 to 19. ENTER SETUP 16 English LANGUAGE Note: Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. TV Output Select Set the player's TV Output Select options according to the TV connection type. For Europe; RGB: When your TV is connected with the SCART jack. Y Cb Cr: When your TV is connected with the COMPONENT VIDEO jacks on the DVD player. For Australia; S: When your TV is connected with the S VIDEO jack. Y Cb Cr: When your TV is connected with the COMPONENT VIDEO jacks on the DVD player. Menu Language Select a language for the Setup menu and on-screen display. Preparations Disc Audio/ Disc Subtitle/ Disc Menu Select the language you prefer for the audio Track (disc audio), subtitles, and the disc menu Original: Refers to the original language in which the disc was recorded. Other: To select another language, press numeric keys then [ENTER] key to enter the corresponding digit number according to the language code list (See page 21. ). If You enter the wrong Language code, press [CLEAR] key. Screen saver The screen saver appears when you leave the DVD player in stop mode for about 5 minutes. If the Screen saver is displayed for 5 minutes, the DVD player automatically turns itself off. DISPLAY AUDIO Progressive Scan TV Output Select Off RGB Each DVD disc has a variety of audio output options. Set the player's AUDIO options according to the type of audio system you use. TV Aspect 4:3: Select when a standard 4:3 TV is connected. 16:9: Select when a 16:9 wide TV is connected. Display Mode Display Mode setting works only when the TV Aspect mode is set to "4:3". Letterbox: Displays a wide picture with bands on the upper and lower portions of the screen. Panscan: Automatically displays the wide Picture on the entire screen and cuts off the portions that do not fit. Dolby Digital/ DTS/ MPEG Bitstream: Select "Bitstream" if you connect the DVD Player's DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. PCM (for Dolby Digital/ MPEG): Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will be automatically down mixed to twochannel PCM audio. Off (for DTS): If you select "Off'', the DTS signal is not output through the DIGITAL OUT jack. Progressive Scan If you are using the COMPONENT VIDEO jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to "Off". [. . . ] "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Knowledge "DTS" and "DTS Digital Out" are registered trademarks of DTS, Inc. DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. English 33 Specifications [Type] System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD video player Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Semiconductor laser [Audio Block] Frequency response Sampling frequency ; 44. 1 kHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Hz ~ 20 kHz Sampling frequency ; 48 kHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]