User manual KENWOOD DVT-6200

[. . . ] DVD HOME THEATER SYSTEM DVT-6200 INSTRUCTION MANUAL B60-5386-08 00 (K/E/X) OC 03/04 *5386/01-17/EN/J Page 1 03. 7. 8, 11:04 AM Adobe PageMaker 6. 5J/PPC 2 Introduction DVT-6200 (EN/K, E, X) Before applying power Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. U. S. A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120V only Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ● DTS : DTS has five full-frequency channels that create effects nearly identical to those in a theater. Sounds seem to zoom from one place to another or entirely surround you. Like Dolby Digital, DTS has much-improved clarity, surround and sound movement capability compared with Dolby Pro Logic. This listen mode is available on CD, LD, and DVD media. DTS is a strictly digital format that can be supplied only by a CD, LD, or DVD player that supports DTS sound. ● Stereo: Stereo listen mode provides standard stereo sound to the front left and right speakers. Note Do not switch the LISTEN mode while recording to VCR. The INPUT/OUTPUT status indicator becomes an input indicator at the time of DOLBY DIGITAL and DTS source and an output indicator at all other times. Manufactured under license from Dolby Laboratories. “DOLBY”, the double-D symbol and “PRO LOGIC” are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. *5386/18-33/EN/J Page 28 03. 7. 8, 11:06 AM Adobe PageMaker 6. 5J/PPC Setting SetLISTEN mode up Up functions DVT-6200 (EN/K, E, X) 29 To set the LISTEN mode manually According to the contents of the disc played in this unit, the LISTEN MODE (selected by the LISTEN MODE key) can be found in the following table SOURCE LISTEN MODE DOLBY DIGITAL DTS DOLBY PRO LOGIC II DISC DOLBY DOLBY DTS DIGITAL DIGITAL (2ch) (5. 1ch) Input VCD/CD CABLE/SAT/VCR (PCM, MP3) (ANALOG) Preparations DOLBY PRO LOGIC STEREO At the time of DTS or DOLBY DIGITAL (5. 1 ch) source Each press switches the modes as shown below. Press the LISTEN MODE key. MAIN UNIT REMOTE (At the time of DTS source) 1 DTS 2 STEREO (At the time of DOLBY DIGITAL (5. 1 ch) source) 1 DOLBY D (DIGITAL) 2 STEREO At the time of PCM or DOLBY DIGITAL (2 ch) source 1 Press the LISTEN MODE key. MAIN UNIT REMOTE Each press switches the modes as shown below. 1 PRO LOGIC (DOLBY PRO LOGIC) ( PL II MOVIE or PL II MUSIC) 2 STEREO 2 When the TRIM (5/∞) keys on the remote or the SKIP (4/¢) keys on the main unit are pressed at a time other than display of STEREO, PRO LOGIC, PL II MOVIE, or PL II MUSIC is switched. MAIN UNIT REMOTE Each press switches the modes as shown below. 1 PRO LOGIC (DOLBY PRO LOGIC) 2 PL II MOVIE 2 PL II MUSIC When the SET UP key is pressed at the time of PL II MUSIC, switching of Panorama mode, Dimension, and Center Width is possible. Description of Dolby Pro Logic II: Music mode Panorama mode : Expands the image of front-channel stereo to the surround speakers to create a sound environment that fills your surroundings. (To change the Panorama mode, press SET UP key at the time of Dolby Pro Logic II Music mode. Display the PANOR OFF or ON, then press the TRIM (5/∞) keys to select on or off. ) Dimension : This controls the balance between the Front and Rear in 2 steps on the front and 2 steps on the rear. Set this parameter to one of the Front steps if the surround effect is too strong, or to one of the Back steps if it is too weak. (To change the Dimension, press SET UP key twice at the time of Dolby Pro Logic II Music mode. Display the DIMEN 0 (or other value), then press the TRIM (5/∞) keys to select F-2, F-3, R-2 or R-3. ) : The center channel signal can be divided and distributed to the Front L/R channels. The adjustment for distributing the center channel signal to the front channels can be applied in eight steps from 0 to 7. Use this adjustment when the center image seems to be too strong. (To change the Center Width, press SET UP key 3 times at the time of Dolby Pro Logic II Music mode. Display the C-WIDTH 0 (or other value), then press the TRIM (5/∞) keys to select 0 ~7. ) Center Width *5386/18-33/EN/J Page 29 03. 7. 8, 11:06 AM Adobe PageMaker 6. 5J/PPC 30 Speaker setting Positioning the speakers Set Up functions DVT-6200 (EN/K, E, X) To achieve the optimum effects obtainable with this SURROUND SOUND system, it is important to position the speakers properly. Refer to the following illustration to find the best location in your room. Preparation Turn on the POWER. Center speaker L C SW R LS Front speaker Sub woofer Front speaker Surround speaker Surround speaker RS Preparations Reset as follows to match your listening environment. For this unit, the speaker levels have been set in advance so that the best volume balance is obtained with standard use. Initial set values for the speaker level Left Front channel (Lch)(L) : 0dB Center channel (Cch)(C) : 0dB Right Front channel (Rch)(R) : 0dB Right Surround channel (RSch)(RS) : 0dB Left Surround channel (LSch)(LS) : 0dB Subwoofer(SW) : 0dB Speaker level setting 1 Press SET UP key for more than 3 seconds The test tone is played back from the Left Front speaker. Adjust the VOLUME CONTROL so that it is slightly loud and fix it there. “L” Blinks. 2 Press the TRIM (5/∞) keys to control the speaker level. The speakers will be switched as follows in intervals of about 2 seconds. L → C → R → RS → LS → SW ÷ After all speakers have been adjusted, operate the Delay time setting (⁄). Adjust the volume with the TRIM (5/∞) keys while the indicator is flashing so that the volume from all speakers except the subwoofer (SW) appears the same. [. . . ] W: 100 mm (3-15/16”) H: 180 mm (7-1/16”) D: 124 mm (4-7/8”) Weight (net) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 7 kg (1 piece) [ DVD/CD/VIDEO CD player section ] Signal read system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Semiconductor laser Wave length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For DVD;640 to 660 nm For CD; 770 to 810 nm Power class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]