User manual KENWOOD HD-7

[. . . ] MICRO HI-FI COMPONENT SYSTEM HD-7 INSTRUCTION MANUAL KENWOOD CORPORATION B60-5276-08 00 C (K, T) OC 0204 2 Before applying power HD-7/EN Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V only Europe and U. K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only For the United Kingdom Preparation Factory fitted moulded mains plug 1. [. . . ] 23 +10 +10 , , 3 Basic : +10 To select track No. 30 +10 , , +10 , 0 : In regard to display of the CD time Each time the "TIME/SPACE" key is pressed during CD playback, the time display on the display is switched. Remote control unit only In regard to title display When a disc conforming to CD TEXT is played and the display key is pressed during CD playback (or during stop), the character information recorded on the CD can be displayed on the display. Each time the display key is pressed, switching is done between the following items. Main unit Remote control TIME 1 Elapsed time of the track : 1:23 2 Remaining time of the track : REMAIN display 2:37 3 Total elapsed time of the disc : TOTAL display 23:50 4 Total remaining time of the disc :REMAIN TOTAL display 36:50 ÷ Only 1 and 2 are displayed during random playback and single track repeat. ÷ At the time of program playback, 4 becomes the display of the total time for the programmed tracks. *1 DISPLAY Disc title *1 Track No. Track title *1 The disc title is displayed during stop. The track title is scrolled during playback. 22 Receiving broadcast station HD-7/EN 4 P. CALL ¢ POWER 1 4 7 2 5 8 0 3 6 9 +10 CLEAR SET DISPLAY /CHARAC DISPLAY TIME ENTER ENTER TUNER/BAND 4 P. CALL ¢ 1 TUNING ¡ 3 AUX /TAPE CD 6 7 STOP AUTO/MONO 4 P. CALL ¢ 1 TUNING ¡ DOWN UP 1 AUTO/MONO SLEEP REPEAT RANDOM P. MODE TIMER SOUND MUTE 1 1 TUNING ¡ II 3 DOWN VOLUME UP display 1. Select the tuner input. Each press of the TUNER/band key switches the band as follows. Basic FM AM 2. Preset a radio station in memory. Collective presetting of stations £ Follow the procedure in "Collective presetting of stations" to preset automatically the tunable radio stations in your area. ÷ Once the stations are stored by auto presetting, you are not required to repeat this procedure the next time you listen to radio. However when you shift to another location whereby the broadcast station frequencies are different, you will have to re-execute the presetting of stations. One-by-one presetting (Manual preset) ¢ A station can also be tuned even when it is not preset. For details, read "Tuning to a non-preset radio station (Auto tuning, Manual tuning)". 3. Tuning (Preset Call) ÷ If radio stations have already been stored with auto presetting or manual presetting, select a station using the 4, ¢ key. Each press of the same key switches the preset stations in sequence. Tuned indication Stereo broadcast Auto tuning reception indication indication AUTO TUNED STEREO FM MHz L R 30 10 5 3 1 0 (­dB) DIGITAL When ¢ is pressed : 1=2=3 . . . ÷ When a key is held depressed, preset stations will be skipped at an interval of about 0. 5 second. ÷ To select a preset station from the remote, use the 4 P. CALL ¢ key or numeric keys. Receiving broadcast station HD-7/EN 23 Collective presetting of stations AUTO PRESET . . . . . . . . and Europe Remote control unit only 1 Select the tuner input. TUNER/BAND 2 Press the "ENTER" key for more than 2 seconds ENTER AUTO STEREO FM MHz L R 30 10 5 3 1 0 (­dB) ÷ A maximum of 40 stations of the band presently being received will be preset. ÷ When there are many stations and the intended station has not been preset, please also use "One-by-one presetting (Manual preset)". Basic Channel space setting The space between radio channels has been set to the one that prevails in the area to which the system is shipped. However, if the current channel space setting does not match the setting in the area where the system is to be used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by referring to the following table. Main unit only 1 Select the tuner input. Each press the "stop 7" key for more than 2 seconds switches the modes as follows. 1 FM 50 k 2 FM 100 k ÷ At FM 50 kHz, the corresponding AM frequency is 9 kHz. At FM 100 kHz, the corresponding AM frequency is 10 kHz. Area 1 2 USA, Canada and South American countries Other countries CHANNEL Space Frequency FM: 100 kHz AM: 10 kHz FM: 50 kHz AM: 9 kHz 2 Press the "stop 7" key for more than 2seconds. 24 Receiving broadcast station HD-7/EN Tuning to a non-preset radio station (Auto tuning, Manual tuning) Select the tuning mode according to the radio wave receiving condition. When the receiving condition is good: AUTO mode When it is poor due to weak radio waves: MANUAL mode 1 Press the " 7 STOP (AUTO/MONO)" key during TUNER input. Main unit Remote control Each press alternates the mode. 1 "AUTO" : Stereo reception 2 "MANUAL" : Monaural reception ÷ In MANUAL mode, FM stations are received in monaural. [. . . ] D : 356 mm (14") Weight (net) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. 9 kg (13. 0 lb) Speakers Enclosure . . . Bass-reflex type (Magnetically shielded) Speaker configuration Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 mm, cone type Tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]