User manual KENWOOD HM-332

[. . . ] MICRO HI-FI COMPONENT SYSTEM HM-332 INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT DIGITAL AUDIO TEXT B60-4726-08 (EN) 2 Before applying power Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. Europe and U. K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only China and Russia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V only *Other countries . . . . . . . . . . . . . . . . . . . . [. . . ] In this case, change the channel space setting in accordance with your area by referring to the following table. 1 Turn power on. 2 Press the TUNER/band key 3 Press the 7STOP key for more than 5 seconds. 4 Select the mode by using the 7STOP key. Each press switches the space frequency alternately. 1 "FM 50 kHz" (FM 50 kHz, AM 9 kHz) 2 "FM 100 kHz" (FM 100 kHz, AM 10 kHz) Area 1 USA, Canada and South American countries 2 Other countries CHANNEL Space Frequency FM: 100 kHz AM: 10 kHz FM: 50 kHz AM: 9 kHz Blinks. 5 Establish the selection by pressing the set/ demo key. Basic section 23 24 Recording on tape Stop the recording 1 5 4 Pause the recording 3 3 2 Stop the recording Basic section 1. Load a tape in deck. 1 Press the TAPE 0 key. 3 Press the TAPE 0 key. TAPE 0 1 ÷ Differentiation between normal (TYPE ) and high (TYPE automatically. ÷ Remove tape slack before loading. ) tape is set 2. Select the tape transport direction. To reverse the transport direction TAPE 2 3 1 Press the TAPE23 key corresonding to the desired direction. 2 Stop playback. ÷ When recording is started, the tape is transported in the direction selected in this step. 2 Check the tape transport direction indicator. ÷ Wind the tape to the position where recording is to be started. * Recording on tape 25 menu 3. Set the recording condition. up volume/ multi control Select the reverse mode. ( ÷ The tape equalizer is defeated during recording. down set/demo 3 Select an input source other than "TAPE" Example: To select the CD input CD 4. Select the source to be recorded. CD TUNER (Broadcasts) AUX (External input) "Adjusting the AUX input level" 01 CD 0:00 6 The character information display shows the recording input source. 4 TAPE rec ÷ If a CD has already been loaded, it starts to play now. Press the 7STOP key to stop it. Basic section 5. Start recording. 5 Pause the recording TAPE rec 1 Press the TAPE rec key. 2 Play (or tune) the input source to be recorded. ÷ Recording stops automatically when the tape side(s) to be recorded have been fully recorded. Points in CD recording Blinks TAPE REC When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode beforehand, the cassette deck recording can be started at the CD starts to be played. ÷ Press the TAPE rec key during recording. It stops after leaving a non-recorded blank of 4 seconds. (Press the key again to resume recording. ) Stop the recording STOP 7 1 Put the CD player in pause mode. 2 Select the track to be recorded with the 4 or ¢ key. (The CD player pauses at the beginning of the selected track. ) 3 Put the cassette deck in Record-pause mode. (Press TAPE rec key twice) 4 Start playing the CD. (Recording starts) ÷ To stop recording, press the 7STOP key. Note Note that this cassette deck cannot record onto Metal tapes. Do not use a cassette with more than 90-minute recording time, for the tape used with such a cassette is very thin and tends to cause troubles such as entanglement around the pinch roller or cutting of tape. 26 Various CD playback features Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) Listening in the desired sequence (program playback) Select the CD input. 1 Let the "PGM" indicator light. Press in stop mode PGM AUTO/MONO Lights PGM -P-01 C D KENWOOD Selection of tracks PGM Select 2 want totrack numbers in the order you play them. 1 Select the track. Program position of the track to be selected next. 05 P-01 Press the numeric keys as shown below. . . . 40 : 0000) 2 Confirm the selection. SET ( To select more than one track, repeat steps 1 and 2 for each track. ) ÷ A track can also be selected using the 4 or ¢ key. [. . . ] 531 kHz ~ 1, 602 kHz (For other countries) 9 kHz step . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 kHz ~ 1, 602 kHz 10 kHz step . . . . . . . . . . . . . . . . . . . . . . . . . . 530 kHz ~ 1, 610 kHz [CD player section] Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Semiconductor laser D/A Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]