User manual KENWOOD HM-L700

[. . . ] Before applying power Caution : Read this page carefully to ensure safe operation. Before applying power It means that there is no danger of hazardous radiation outside the product. Before applying power This unit can playback music data recorded in CD-R (Compact Disc Recordable) and CD-RW (Compact Disc Rewritable). However, some CD-R and CD-RW discs may not be playable on the CD player depending on the recording characteristics of the recording equipment (including the pick-up), properties of the CD-R or CD-RW in use, its recording condition and so on. [. . . ] Press the TUNING (5 or ) key repeatedly until the desired station is received. The desired station can also be received by holding the TUNING (5 or ) key depressed until its frequency is displayed. Main unit While "AUTO TUNE" or "MANUAL TUNE" appears on the display, use the 4 and ¢ keys to select stations. If "AUTO TUNE" and "MANUAL TUNE" do not appear on the display, press the STOP/[tuning mode] key again to select a station. The next preset station can be received automatically every time the 4 or ¢ key is pressed. Press the 4 or ¢ key repeatedly until the desired station is received. The desired station can also be received by holding the 4 or ¢ key depressed until its frequency is displayed. To memorize an RDS station, wait for the station name to appear on the display before performing step 2. Remote control unit Main unit (Proceed to step 3 while "MEMORY" is lit. If several stations are preset under the same number, the previous memory is replaced with the latest memory contents. Main unit Sequence for pressing numeric keys To input "12" . Remote control unit Main unit RDS is a system which transmits useful information (in the form digital data) for FM broadcasts along with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name. For reception of RDS stations, the auto memory function must be used to preset the stations. This unit is equipped with the following functions utilizing RDS data : When an RDS broadcast is received, the station name is automatically displayed. The "RDS" indicator lights up when an RDS broadcast (signal) is received. Some functions may not be provided or be given different names depending on countries or areas. By specifying the type of program (genre) you want to listen to, the tuner automatically searches for a station which is currently broadcasting a program of the specified type. However, if a station is not preset by AUTO MEMORY, "NO DATA" will flash instead of the program (genre) type and PTY search is not available. Preset RDS stations with the auto memory function. When an RDS broadcast is received, the program type is shown on the display. Use program type table on the right for your convenience. [. . . ] Before calling for service, check the following table according to the symptom of your trouble. The microcomputer may fall into malfunction (impossibility to operate, erroneous display, etc. ) when the power cord is unplugged while unit is ON or due to an external factor. In this case, execute the following procedure to reset the microcomputer and return it to normal condition. [. . . ]