User manual KENWOOD KDC-237

[. . . ] CD-RECEIVER KDC-237 INSTRUCTION MANUAL © B64-3700-00/00 (E0/E20) Contents Safety precautions Notes General features Power Selecting the Source Volume Attenuator Audio Control Audio Setup Bass Boost Speaker Setting Switching Display Theft Deterrent Faceplate TEL Mute 3 4 6 Menu system 17 Tuner features Tuning Station Preset Memory Auto Memory Entry Preset Tuning 10 Menu System Touch Sensor Tone Manual Clock Adjustment Synchronize Clock DSI (Disabled System Indicator) Dimmer News Bulletin with Timeout Setting Local Seek Tuning Mode AF (Alternative Frequency) Restricting RDS Region (Region Restrict Function) Auto TP Seek Monaural Reception Auxiliary Input Display Setting Built-in Auxiliary input Setting Power OFF Timer Demonstration mode Setting Accessories/ Installation Procedure 12 Connecting Wires to Terminals Installation Troubleshooting Guide 15 Specifications 21 22 24 25 26 RDS features Traffic Information PTY (Program Type) Program Type preset Changing Language for PTY Function CD player features Playing CD Fast Forwarding and Reversing Track Search Track Repeat Scan Play Random Play 2| English Safety precautions 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and wiring work to professionals. Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. [. . . ] Each time you press the button, the Track Repeat turns ON or OFF. When the Track Repeat is ON, "TRAC REP" is displayed. Scan Play Playing the first part of each song on the disc you are listening to and searching for the song you want to hear. 1 Start Scan Play Press the [SCAN] button. "TRAC SCN" is displayed. 2 Release it when the song you want to listen to is played Press the [SCAN] button. Random Play Playing all the songs on the disc in random order. Each time you press the button, Random Play turns ON or OFF. When the Random mode is ON, "DISC RDM" is displayed. / · When you push the Control knob toward [¢], the next random song starts. 16 | English Menu system Control knob RDS indicator Menu display Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. / · When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound select the "BEEP" display. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. 3 Set the menu item Push the Control knob towards [4] or [¢]. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". You can continue by returning to step 2 and setting other items. English | 17 Menu system In Standby mode Dimmer You can lower the brightness of the display by using the dimmer function. Display "DIM ON" "DIM OFF" Setting The display dims. The display doesn't dim. Manual Clock Adjustment / · You can do this adjustment when the <Synchronize Clock> (page 18) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. News Bulletin with Timeout Setting The tuner automatically changes when a news bulletin starts even if the radio is not being listened to. Also, you can set the time interval when interruption is prohibited. Display and Setting "NEWS OFF" "NEWS 00M" "NEWS 90M" . . . 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit's clock. Display "SYNC ON" "SYNC OFF" Setting Synchronizes the time. [. . . ] Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc. Yellow Blue/White Red Black Battery Power Control Ignition (ACC) Earth (Ground) Connection Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black Rear Right (+) Rear Right (­) Front Right (+) Front Right (­) Front Left (+) Front Left (­) Rear Left (+) Rear Left (­) 1 (Default setting) The A-7 pin (red) of the vehicle's ISO connector is linked with the ignition, and the A4 pin (yellow) is connected to the constant power supply. Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow) 2 The A-7 pin (red) of the vehicle's ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition. Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow) 3 The A-4 pin (yellow) of the vehicle's ISO connector is not connected to anything, while the A-7 pin (red) is connected to the constant power supply (or both the A-7 (red) and A-4 (yellow) pins are connected to the constant power supply). Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow) / · When the connection is made as in 3 above, the unit's power will not be linked to the ignition key. For that reason, always make sure to turn off the unit's power when the ignition is turned off. To link the unit's power to the ignition, connect the ignition cable (ACC. . . red) to a power source that can be turned on and off with the ignition key. English | 23 Installation Installation Metal mounting strap (commercially available) Firewall or metal support Removing the Unit 1 Refer to the section <Removing the hard rubber frame> and then remove the hard rubber frame. 2 Remove the screw (M4 × 8) on the back panel. 3 Insert the two removal tools deeply into the slots on each side, as shown. 4 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside. Screw (M4X8) (commercially available) Accessory2 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. [. . . ]