User manual KENWOOD KDC-139

[. . . ] Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Unsupported connection may result in damage. Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. [. . . ] · When the Letter Seek is started, it cannot be cancelled. 2 Select the Play mode Press the [1] ("S. MODE") button. Each time the button is pressed, the Play mode switches as follows. Play mode "Play List Mode" "Genre Mode" "Artist Mode" "Album Mode" "Folder Mode" Category which is to be arranged Play list order. By the folder recorded in Disc. 4 Select the song to play · The category information of each song is the data registered in Media Manager when ACDrive disc is being generated. · The announcement when the mode is switched can be canceled by <Voice Index> (page 42). · The advancement of the Play mode information can be selected by [AM] and [FM] keys. Press the Control knob when the initial of the song you are searching is displayed and read. The selected initial group plays. · The category with marks or letters that cannot be read cannot be selected. Function of the KDC-W8531/KDC-139 Function of the ACDrive disc Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Hold down on [FM] of the Control knob for at least 1 second. Letter Seek The song, in which you want to play, can be searched by selecting the initial of Genre name, Artist name, or Album name. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "S. MODE" is displayed above the [1] button. Refer to <Notes on Multi-function Key System> (page 9). 32 | English Disc Naming (DNPS) Attaching a title to a CD. 1 Play the disc you want to attach a name to · A title can't be attached to MD or Audio file media. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "Menu" is displayed. · When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. Display "Beep : ON" "Beep : OFF" Setting Beep is heard. Beep canceled. 5 Select the Security Code numbers Push the Control knob to [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "Security" is displayed. 8 Do the step 4 through 7 step operation, and reenter the security code. The Security Code function activates. · If you enter a Code different from your Security Code, you have to start over from step 4. In Standby mode Manual Clock Adjustment · This adjustment can be done when the <Synchronize Clock> (page 36) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob to [FM] or [AM]. Select the "Clock Adjust" display. Press the Reset button and when it's removed from the battery power source 1 Turn the power ON. 2 Do the step 4 through 7 step operation, and reenter the security code. The unit can be used. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob to [FM] or [AM]. Adjust the minutes Push the Control knob to [4] or [¢]. 4 Exit Clock adjustment mode Press the [MENU] button. English | 35 Menu system In Standby mode In Standby mode Date Adjustment 1 Select Date Adjust mode Push the knob to [FM] or [AM]. Select the "Date Adjust" display. DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. [. . . ] No tracks are recorded on the MD, although it has a title. Media was played that doesn't have data recorded that the unit can play. Use media that has data recorded that the unit can play. The faceplate of the slave unit being connected to this unit has been removed. [. . . ]