User manual KENWOOD KDC-202

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] The reverse search is not "recycled" to the last track on the disc. Making a Forward Track Search: Press the ¢ button to display the desired track number. Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. NOTE (for disc changers) You cannot make a forward track search when listening to the last track on a disc. Track / Disc Repeat Function Repeat playing the current track or disc. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : w Track Repeat ON w Disc Repeat ON (Function of disc changers) w Track/Disc Repeat OFF The track number blinks in the display when the track repeat function is on. The disc number blinks in the display when the disc repeat function is on. NOTE The repeat play function is cancelled when you stop playing the disc. -- 20 -- Track Scan Function Successively play the beginning of each track on a disc until you find the track that you want to listen to. Turning Track Scan Function On/Off: Press the SCAN button to switch the track scan function on and off. The first 10 seconds of each track are played, and the tracks are played in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. NOTE and off. The display of the track number changes continuously as the next track is being selected. When the track has been selected, play starts. · When there is an attempt to display the title of a disc for which the disc title/track title has not been recorded, "NO TEXT" is displayed for CD and "NO NAME" is displayed for MD. · Depending on the type of characters of the CD Text, some characters may not be displayable. 3 Switching settings Press either the AM or FM button. The display and setting will change. 4 Press the MENU button to end the menu mode. To scroll automatically: 1 Press the DISP button to display the disc title or the track title. The titles will be displayed in one scrolling display. NOTE When the disc or track to be played changes, the title is displayed in one scrolling display. 2 Holding down the DISP button for one second or more results in one scrolling display of the titles. NOTE -- 22 -- The setting of the text scroll function is in common with Radio Text Scroll of the RBDS mode. Presetting Disc Names Store the names of discs to be displayed when played. 5 Continue steps 3 and 4 until all the characters are chosen for the name. 1 Play the disc whose name you want to preset. NOTE 6 Press the NAME. S button. The disc name is stored and the disc name preset mode is cancelled. If you make no entry in a 10-second period, the name will be stored with the characters input so far. NOTE · This function is not available for disc changers that do not feature the Disc Name Preset function. · This procedure is not to be used to store the disc and track titles for MDs that you record. 2 Hold down the NAME. S button for two seconds or more. "NAME SET" is displayed and the disc name preset mode is entered. The cursor blinks in the position where character input can be made. 3 Press either the 4 or ¢ button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. You can also move the cursor left or right by pressing the 4 or ¢ buttons, respectively, on the remote control. 4 Press the DISC+ or DISC­ button to display the desired character. Besides the alphabet (capital letters only) and numerals, you can choose the following characters: /, +, ­, *, =, <, >, [ and ]. NOTE Direct Alphabet Input (Function of the KCA-R6A : Optional) If the disc changers that were manufactured and sold after 1997 are connected, you can directly input letters using the number/letter entry buttons on the remote control. [. . . ] Clean the CD, referring to the section on "Cleaning CDs" (see page 5). Clean the CD, referring to the section on "Cleaning CDs" (see page 5). Turn off the random play function. English A CD ejects as soon as it is loaded. Disc Changer PROBLEM The disc changer mode cannot be selected. POSSIBLE CAUSE No cable has been connected to the disc changer input terminal on the unit. The O-N selection switch of the disc changer is not set properly. SOLUTION Connect the cable to the disc changer input terminal on the unit. [. . . ]