User manual KENWOOD KDC-325 Instruction Manual

[. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0. 21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Canceling Direct Disc Search While It Is Operating: Press the 38 button. Direct Track Search 1 Using the number buttons on the remote, input the number of the track that you want to listen to. The selected track number will blink in the display for 10 seconds. If you make no further input in the 10-second period, the number entry mode will automatically be canceled. Canceling Direct Track Search While It Is Operating: Press the 38 button. NOTE Track / Disc Repeat Repeat playing the track or the disc currently being listened to. Turning Repeat Play On/Off: Press the REP button to switch repeat track/disc play on and off as follows: 2 Press either the 4 or ¢ button while the track number is You cannot use the direct track search function while doing track -- 20 -- M Track Repeat ON M M Disc Repeat ON (Function of disc changers) Track/Disc Repeat OFF "T-Repeat/T-REP ON" is displayed and the track number blinks in the display when track repeat is on. "D-Repeat/D-REP ON" is displayed and the disc number blinks in the display when disc repeat is on. NOTE Press the D. SCN button. "D-Scan/DSCN ON" is displayed and the first 10 seconds of each disc will be played, in the order they are loaded on the changer. The disc number currently being heard blinks in the display. Stopping to Listen to the Disc Being Scanned: Press the 38 or D. SCN button again to stop the scan and keep on listening to the disc normally. NOTE Repeat play is canceled when you eject the disc. · The disc scan function is canceled when you eject the disc. · The disc scan function only scans each disc on the changer once. · "LOAD" is displayed when discs are being exchanged on the disc changer. Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. When you cannot identify a disc because of the "NO ACCES" display after inserting a disc magazine, try playing it using the disc scan or a similar function to display the disc name. Also note that "NO DISC" will be displayed when a disc has not been loaded. Rapid display (forward / reverse): Press the DISC+ or DISC­ button. Pressing the DISC+ button will rapidly display the preset names/disc titles in order. -- 22 -- Pressing the DISC­ button will rapidly display the preset names/disc titles in reverse order. 2 When the name appears for the disc you want to play Press the OK button. The disc whose name is displayed will be recalled, and the disc name preset play (DNPP) mode will end. To cancel DNPP mode: Press the DNPP button. The disc name preset play (DNPP) mode will be canceled. -- 23 -- CD/External disc control features English Presetting Disc Names (DNPS) Store the names of discs to be displayed when played. NOTE 1 Play the disc whose name you want to preset. NOTE · This function is not available for disc changers that do not feature the Disc Name Preset function. · This procedure is not to be used to store the disc and track titles for MDs that you record. · The disc name preset function cannot be used when a disc title name or track title is displayed. The operation and characters that can be entered may change as listed below, depending on the unit that is connected. A press of the 38 button exits the disc name preset mode. Operations can be followed again from Step 2 at a time such as this, and the characters to be input are selected using the procedure described below. [. . . ] Eject the disc magazine and check the number for the specified disc. If skipping happens at the same place when the car is stopped, something with the CD is wrong. Press the reset button on the unit (see p. 5). The sound skips. Something is touching the disc changer. The CD is scratched or dirty. The display shows that the changer is being played, but no sound can be heard. [. . . ]