User manual KENWOOD KDC-C711

[. . . ] Frequency Offset AMP Control Traffic Information CRSC (Clean Reception System Circuit) Receive mode Setting SIRIUS ID (ESN) display Auxiliary Input Display Setting & Station/Disc Naming Text Scroll Built-in Auxiliary input Setting CD Read Setting Picture downloading Voice Index ACDrive firmware version display Unique ID display Audio Preset Memory Audio Preset Recall Demonstration mode Setting 38 Basic Operations of remote control 52 Accessories/ Installation Procedure 55 Connecting Wires to Terminals Installation Removing the Unit Troubleshooting Guide Specifications 56 57 59 60 64 The "AAC" logo is trademark of Dolby Laboratories. English | 3 Safety precautions 2 WARNING To prevent injury while using this product, take the following safety precautions: · To prevent a short circuit and possible fire, never put any metallic objects (such as coins or metal tools) inside the product. · If you are the driver and your vehicle is moving, do not watch the product's display or use its controls for an extended period. · Do not use this product in any way that prevents you from driving safely. [. . . ] · If there is no signal in the input Channel, "No Channel" appears. (KTC-SR901: optional accessory) English | 35 SIRIUS tuner control features Preset Tuning Recalling the channels in the memory. 1 Select the preset band Push the Control knob toward [FM]. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" -- "[6]" are displayed above the [1] -- [6] buttons. 3 Recall the channel Press the desired [1] -- [6] button. Channel Scan Checks every receivable Channel for 10 seconds. 1 Start Channel Scan Press the [AUTO] button for at least 2 seconds. The channel number display blinks. 2 Release the button when the song you want to hear is received Press the [AUTO] button for at least 2 seconds. Text Scroll for SIRIUS tuner source Scrolls the displayed channel name and other items. Push the Control knob toward [FM] for at least 2 seconds. · When the <Display Illumination Control> (page 41) is set to OFF, the display may black out while scrolling. 36 | English HD Radio control features Control knob SRC Band display Frequency display About HD Radio · When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. · With the HD Radio tuner, you can use the similar functions to <Station Preset Memory>, <Auto Memory Entry>, and <Preset Tuning> of Tuner features. Refer to Tuner features for how to use the functions. Tuning Selecting the station. 1 Select HD Radio source Press the [SRC] button. Select the "HD Radio" display. 2 Select the HD FM band Push the Control knob toward [FM]. Each time you push the knob to [FM], the band alternates between the HF1, HF2, and HF3 bands. Select the HD AM band Push the Control knob toward [AM]. 3 Tune up or down band Push the Control knob towards [4] or [¢]. English | 37 Menu system Control knob MENU SRC Menu display Menu System Setting beep sound during operation, etc. When "Re-Enter" is displayed, "Security Set" is also displayed. 4 Select the Seciruty Code numbers Push the Control knob towards [FM] or [AM]. 5 Repeat steps 3 and 4, and complete the Security Code. 8 Do the step 4 through 7 operation, and reenter the Security Code. The Security Code function activates. 6 Press the Control knob for at least 3 seconds. "Clear" is displayed. The Security Code function deactivates. · If a wrong security code is entered, "Error" is displayed. Enter a correct security code. 9 Exit Security Code mode Press the [MENU] button. English | 39 Menu system In Standby mode In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep : ON" "Beep : OFF" Setting Beep is heard. Beep canceled. Date Adjustment 1 Select Date Adjust mode Push the knob towards [FM] or [AM]. Select the "Date Adjust" display. 2 Enter Date Adjust mode Press the Control knob for at least 1 second. The date display blinks. 3 Selecting the item (day, month, or year) to In Standby mode Manual Clock Adjustment · You can do this adjustment when the <Synchronize Clock> (page 41) is set as OFF. (KDC-X790 only) adjust Push the Control knob towards [4] or [¢]. The items that are blinking are items that you can adjust. 4 Adjust each item Push the Control knob towards [FM] or [AM]. 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "Clock Adjust" display. 5 Repeat step 3 and 4 operation and adjust the date. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. [. . . ] If the "Error 77" code does not disappear, consult your nearest service center. Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. And then press the reset button on the unit. [. . . ]