User manual KENWOOD KDC-MP4026V

[. . . ] KDC-MP4026V CD-RECEIVER INSTRUCTION MANUAL © B64-2687-00/01 (MW) B64-2687-00_U. S_r3. 5. Indd 1 03. 11. 28, 9:29:12 AM Contents Safety precautions Notes Notes on playing MP3/WMA About CDs General features Power Selecting the Source Volume Attenuator Loudness System Q Audio Control Speaker Setting Switching Display TEL Mute Station/Disc Naming (SNPS/DNPS) Theft Deterrent Faceplate 3 5 6 8 9 Menu system Menu System Touch Sensor Tone Manual Clock Adjustment DSI (Disabled System Indicator) CRSC (Clean Reception System Circuit) Auxiliary Input Display Setting & Station/Disc Naming Text Scroll CD Read Setting Built-in Auxiliary input Setting Switches the NTSC/PAL setting 19 Basic Operations of remote Loading and Replacing the battery Basic operations In Tuner source In Disc source 21 Accessories/ Installation Procedure 13 Accessories Installation Procedure 23 Tuner features Tuning Mode Tuning Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting Connecting Wires to Terminals Installation Removing the Unit Troubleshooting Guide Specifications 24 25 27 28 31 CD/MP3/WMA/VCD/External disc control features 15 Playing CD & MP3/WMA & VCD Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Folder Select Audio output select Text/Title Scroll DNPP (Disc Name Preset Play) 2 | English B64-2687-00_U. S_r3. 5. Indd 2 03. 11. 28, 9:29:15 AM Safety precautions 2WARNING To prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or other wires with a 0. 75mm² (AWG18) or more to prevent wire deterioration and damage to the wire coating. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. [. . . ] The Folder Select mode releases, and the MP3/ WMA in the folder being displayed is played. • The methods for moving to other folders in the folder select mode are different from those in the folder search mode. See 'Notes on playing MP3/WMA' (page 6) for details. 2 When the disc you want is displayed Press the [OK] button on the remote. The disc being displayed is played. Canceling the DNPP mode Press the [DNPP] button on the remote. English | 17 B64-2687-00_U. S_r3. 5. Indd 17 03. 11. 28, 9:30:09 AM Menu system AM FM RDM REP SRC MENU 4 ¢ Menu display Menu System Setting during operation beep sound etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. • When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Press the [4] or [¢] button. Example: When "BEEP" is selected, each time the button is pressed it switches "BEEP ON" or "BEEP OFF". You can continue by returning to step 2 and setting other items. 18 | English B64-2687-00_U. S_r3. 5. Indd 18 03. 11. 28, 9:30:18 AM Manual Clock Adjustment 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "CLK ADJ" display. Auxiliary Input Display Setting & Station/Disc Naming For selecting the display when switched to Auxiliary input source. For the Station/Disc Naming refer to the 'Station/Disc Naming (SNPS/ DNPS)' (page 12). 2 Enter Clock Adjust mode Press the [4] or [¢] button for at least 2 seconds. The clock display blinks. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display. 3 Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [4] or [¢] button. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 4 Exit Clock adjustment mode Press the [MENU] button. 3 Select Auxiliary input display setting mode Press the [FM] or [AM] button. Select the "AUX NAME" display. 4 Enter Auxiliary input display setting mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. Press the [4] or [¢] button for at least 2 seconds. The presently selected Auxiliary input display is displayed. 5 Select the Auxiliary input display Press the [4] or [¢] button. [. . . ] No disc has been loaded in the disc magazine. No tracks are recorded on the MD, although it has a title. Media was played that doesn’t have data recorded that the unit can play. ➪ Use media that has data recorded that the unit can play. [. . . ]