User manual KENWOOD KDC-MP819

[. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0. 21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. NOTE (For disc changers) You cannot make a forward track search when listening to the last track on a disc. When one disc has finished playing its last track, the next disc in the changer will start playing. When the last disc in the changer has finished, the player will return to the first disc and start playing it. Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Hold down on the button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point. -- 27 -- CD/External disc control features English Disc Search (Function of disc changers) Search forward or backward through the discs in a disc changer. Making a Reverse Disc Search: Press the DISC button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. The 4 button moves the cursor to the left, and the button to the right. You can also move the cursor left or right by pressing the 4 or buttons, respectively, on the remote. 4 Each press of the 38 button results in the type of characters that are to be entered changing between alphabet and numerals/symbols. Press the DISC+ or DISC button to display the desired character. Characters that can be displayed are as follows. Alphabet (upper case): A ~ Z Alphabet (lower case): a ~ z Numerals and symbols: 0~9 @ " ` ` % & * + - = , . / \ < > [ ] Special characters: < fl >fi 5 Continue steps 3 and 4 until all the characters are chosen for You can enter up to 12 characters for each name. 6 Press either the NAME button on the main unit or the OK button on the remote. The disc name is stored and the disc name preset mode is canceled. If you make no entry in a 10-second period, the name will be stored with the characters input so far. NOTE The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. Up to 30 CDs can be registered with this unit. [. . . ] Track repeat, disc repeat, track scan, random play, and magazine random play start by themselves. Cannot play CD-R or CD-RW. The computer chip in the unit is not functioning normally. Random play or magazine random play has been selected. The setting is not canceled. Turn off random play or magazine random play. The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed. Finalization processing is not being conducted for CDR/CD-RW. [. . . ]