User manual KENWOOD KDC-S3007

[. . . ] · Do not watch or fix your eyes on the unit's display when you are driving for any extended period. · Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and wiring work to professionals. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. [. . . ] Each time you push the knob towards down, the folder just below the current folder is displayed. " " is displayed while the upper level folder is displayed. 3 Determine the folder Press the Control knob. The music in the determined folder are displayed. 4 Select the music you want to listen to Operation type Operation Movement between music Push the Control knob towards right or left. Return to folder selection Press the Control knob for at least 1 second. step 5 Play the selected music Press the Control knob. Scrolling the file/folder name display Push the Control knob toward up for at least 2 seconds. Cancelling Folder Select 2 Press the [F. SEL] button. English | 19 HD Radio control features AUTO/AME FM AM 1-6 SRC Control knob Band display Frequency display ST indicator Preset station number About HD Radio · When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. · With the HD Radio tuner, you can use the similar functions to <Station Preset Memory>, <Auto Memory Entry>, <Tuning Mode> and <Preset Tuning> of Tuner features. Refer to Tuner features for how to use the functions. Tuning Selecting the station. 1 Select HD Radio source Press the [SRC] button. Select the "HD RADIO" display. 2 Select the HD FM band Push the Control knob toward [FM]. Each time you push the knob to [FM], the band alternates between the HF1, HF2, and HF3 bands. The Security Code function deactivates. 8 Do the step 4 through 7 operation, and reenter the Security Code. The Security Code function activates. 7 Exit Security Code mode Press the [MENU] button. / · If you enter the wrong code in step 4 through 6, repeat from step 4. / · If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code. 9 Exit Security Code mode Press the [MENU] button. 22 | English In Standby mode Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display "DISP ON" "DISP OFF" Setting Keeps the display on. Turns off the display when you perform no operation for 5 seconds. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. / In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards up or down. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards up or down. Adjust the minutes Push the Control knob towards right or left. · Set the Display Illumination Control when the <Demonstration mode Setting> (page 27) is set to OFF. [. . . ] And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. Discs are being exchanged in the Disc changer. The unit is reading the data on the disc. [. . . ]