User manual KENWOOD KDC-S5009

[. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0. 21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] If you make no further input in the 10-second period, the number entry mode will automatically be canceled. Canceling Direct Track Search While It Is Operating: Press the 38 button. NOTE 2 Press either the 4 or ¢ button while the track number is (For disc changers) You cannot make a forward track search when listening to the last track on a disc. NOTE Disc Search (Function of disc changers) Search forward or backward through the discs in a disc changer. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. You cannot use the direct track search function while doing track or disc scans or using random or magazine-random play. Direct Disc Search (Function of disc changers with remote) Using the remote, directly input the disc number that you want to listen to. 1 Using the number buttons on the remote, input the number of the disc that you want to listen to. The selected disc number will blink in the display for 10 seconds. If you make no further input in the 10-second period, the number entry mode will automatically be canceled. -- 24 -- NOTE · Input "0" to select disc 10. · If you input more than two numbers all at once, a search will be made only of the last number input. 2 Press either the DISC+ or DISC­ button while the number inputted is blinking. Canceling Direct Disc Search While It Is Operating: Press the 38 button. Starting the Track Scan : Press the SCAN button. Note that depending on the unit, display may not be possible. · If you try to display the name of a disc that does not have one, "NO NAME" is displayed instead. · When there is an attempt to display the title of a disc for which the disc title/track title has not been recorded, "NO TEXT" is displayed for CD and "NO TITLE/NO NAME" is displayed for MD. · Depending on the type of characters of the CD text, some characters may not be displayed. -- 26 -- Text Scroll This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll automatically: Press the DISP button to display the disc title or the track title. The display of the text will be scrolled repeatedly. To scroll manually: 1 Press the DISP button to display the disc title or the track title. 2 Pressing the DISP button for at least one second results in one scrolling display of the titles. NOTE Please see the menu settings (page 38) about switching between manual scrolling and automatic scrolling. -- 27 -- CD/External disc control features English Presetting Disc Names (DNPS) Store the names of discs to be displayed when played. NOTE 1 Play the disc whose name you want to preset. NOTE · This function is not available for disc changers that do not feature the Disc Name Preset function. · This procedure is not to be used to store the disc and track titles for MDs that you record. · The disc name preset function cannot be used when a disc title name or track title is displayed. The operation and characters that can be entered may change as listed below, depending on the unit that is connected. A press of the 38 button exits the disc name preset mode. [. . . ] Press the reset button on the unit (see p. 5). The sound skips. Something is touching the disc changer. The CD is scratched or dirty. The display shows that the changer is being played, but no sound can be heard. Track repeat, disc repeat, track scan, disc scan, random play, and magazine random play start by themselves. The computer chip in the unit is not functioning normally. Random play or magazine random play has been selected. [. . . ]