User manual KENWOOD KDC-X492

[. . . ] KDC-X492 KDC-MP438U KDC-MP408U KDC-MP338 CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] for how to select menu items , refer to <Menu System>(page 12).  • If you enter the wrong Code in steps 3 through 5, repeat from step 3. € When the Security Code function is activated, “SECURITY SET” changes to “SECURITY CLR”. € To deactivate the Security Code function, see the next section <Deactivating Security Code>. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed. 3 Adjust the time Push the control knob towards up or down to adjust the hours and right or left to adjust the minutes. 2 Do the step 3 through 6 operation, and enter the Security Code. Function of KDC-X492 When LX AMP unit connecting AMP Control Deactivating Security Code Deactivating the Security Code function. You can control the LX AMP connected to the unit. 1 Select AMP Control item during Menu mode Select the “AMS CONTROL” display. for how to select menu items , refer to <Menu System>(page 12). 1 Select Security Code item during Menu mode Select the “SECURITY CLR” display. for how to select menu items , refer to <Menu System>(page 12). 2 Enter AMP Control mode Press the Control knob for at least 1 second. 2 Enter Security Code mode Press the Control knob for at least 1 second. when “ENTER” is displayed , “CODE” is also displayed. 3 Select the AMP Control item for adjustment Push the Control knob towards up or down. 3 Select the digits to enter Push the Control knob towards right or left.  • For the details on the AMP Control item, see the Instruction manual attached to the LX AMP. 4 Select the Security Code numbers Push the Control knob towards up or down. 4 Adjust the AMP Control item Push the Control knob towards right or left. [. . . ] See <About Audio file> (page 16) for information on supported iPods. ž Remove the USB device and then reconnect it. ž Confirm that the software for the iPod is the latest version. The Remove mode has been selected for the USB device/iPod. [. . . ]