User manual KENWOOD KDC-X689

[. . . ] CD-RECEIVER KDC-X689 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X689 Serial number US Residence Only Register Online Register your Kenwood product at www. kenwoodusa. com © B64-3147-00/00 (KW) Contents Safety precautions Notes Warning About CDs About AAC, MP3 and WMA General features Power Hiding the Control Panel Selecting the Source Volume Attenuator System Q Speaker Setting Audio Control Audio Setup Subwoofer Output Display Setting Text Selection for Display Text Display Switching Graphic part/ Spectrum Analyzer Display Switching Station/Disc Naming (SNPS/DNPS) Faceplate Angle Adjustment Theft Deterrent Faceplate TEL Mute 4 5 6 7 8 9 CD/Audio file/External disc control features 23 Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Disc Random Play Folder Select Switching the Play mode Letter Seek Text/Title Scroll HD Radio control features Tuning 28 29 Menu system Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Date Adjustment Date Mode Dimmer OFF Wait Time Setting Built-in Amp Setting Dual Zone System Setting B. M. S. [. . . ] Select the "HD Radio" display. 2 Select the HD FM band Push the Control knob toward [FM]. Each time you push the knob to [FM], the band alternates between the HF1, HF2, and HF3 bands. Select the HD AM band Push the Control knob toward [AM]. 3 Tune up or down band Push the Control knob towards [4] or [¢]. 28 | English Menu system MENU SRC Control knob Clock Adjust Beep:ON Security Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. You can continue by returning to step 2 and setting other items. 4 Exit Menu mode Press the [MENU] button. · When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. · Three menu items appear on the display. The menu item displayed at the center is the one you can adjust. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "Menu" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound select the "Beep" display. 3 Set the menu item Push the Control knob towards [4] or [¢]. Example: When you select "Beep", each time you push the knob it alternates between "Beep:ON" or "Beep:OFF". English | 29 Menu system In Standby mode Security Code Because authorization by the Security Code is required when the audio unit is removed from the vehicle, personalizing this unit by using the Security Code is helpful in preventing theft. Press the Reset button when the audio unit is removed from the battery power source 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. You can being using the unit. · Setup Security Code when the <Demonstration mode Setting> (page 35) is set as OFF. · When you activate the Security Code function, the code cannot be changed and the function cannot be released. Note, you can set the Security Code with a 4 digit number of your choice. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep:ON" "Beep:OFF" Setting Beep is heard. Beep canceled. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "Menu" is displayed, "Security" is also displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "CODE" is also displayed. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "Clock Adjust" display. 4 Select the digits to enter Push the Control knob towards [4] or [¢]. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. [. . . ] No Name: Load: READING: IN (Blink): Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. Attempted to display DNPS during the CD play having no disc names preset. [. . . ]