User manual KENWOOD KDC-X790 Instruction Manual

[. . . ] CD-RECEIVER KDC-X790 KDC-MP732 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X790/ KDC-MP732 Serial number US Residence Only Register Online Register your Kenwood product at www. Kenwoodusa. com © B64-3301-00/01 (KW/K0) Contents Safety precautions Notes Warning About CDs About AAC, MP3 and WMA 4 5 6 7 8 CD/Audio file/External disc control features 28 Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play All Random Play Folder Select Switching the Play mode Letter Seek Text/Title Scroll Notes on Multi-function Key System 9 General features Power Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Subwoofer Output TEL Mute Faceplate Angle Adjustment Theft Deterrent Faceplate Display Type Selection Graphic part Display Switching Wallpaper selecting Text Selection for Display Text Display Switching Font Color Select G-Analyzer display Switching Station/Disc Naming (SNPS/DNPS) 10 SIRIUS tuner control features Select SIRIUS Satellite Radio Mode Switching Seek Mode Select the channel Category and Channel Search Direct Access Tuning Selecting the Preset Band Channel Preset Memory Preset Tuning Channel Scan Text Scroll for SIRIUS tuner source 34 HD Radio control features About HD Radio Tuning 37 Tuner features Tuning Tuning Mode Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning 24 RDS features Radio Text Scroll PTY (Program Type) Registration of a station as a PTY Program Type preset 26 2| English Menu system Menu System Activating Security Code Deactivating Security Code Touch Sensor Tone Manual Clock Adjustment Date Adjustment Date Mode Synchronize Clock DSI (Disabled System Indicator) Selectable Illumination Display Illumination Control Dimmer Built-in Amp Setting G-Counter Level set G-Analyzer Reset G-Analyzer Calibration setup G-Analyzer Horsepower Gauge setup G-Analyzer Horsepower Analysis G-Graphic Select G-Analyzer Stop Watch Dual Zone System Setting Supreme Setting B. M. S. [. . . ] Each time you push the knob to [FM], the band alternates between the HF1, HF2, and HF3 bands. Select the HD AM band Push the Control knob toward [AM]. 3 Tune up or down band Push the Control knob towards [4] or [¢]. English | 37 Menu system Control knob MENU SRC Menu display Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. You can continue by returning to step 2 and setting other items. 4 Exit Menu mode Press the [MENU] button. · When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. · Three menu items appear on the display. The menu item displayed at the center is the one you can adjust. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound select the "Beep" display. 3 Set the menu item Push the Control knob towards [4] or [¢]. Example: When you select "Beep", each time you push the knob it alternates between "Beep : ON" or "Beep : OFF". Select 1 of them as the setting. 38 | English In Standby mode Activating Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. · If you enter the wrong Code in steps 4 through 6, repeat from step 4. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. Now, you can use the unit. · Set the Security Code when the <Demonstration mode Setting> (page 51) is set to OFF. · You can set the Security Code with a 4 digit number of your choice. · The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. · When the Security Code function is activated, "Security Set" changes to "Security Clear". · To deactivate the Security Code function, see the next section <Deactivating Security Code>. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security Set" is also displayed. In Standby mode Deactivating Security Code To deactivate the Security Code function. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "Security Set" is also displayed. 1 Select Security Code mode Push the Control knob towards [FM] or [AM]. [. . . ] If the "Mecha Error" code does not disappear, consult your nearest service center. Error 77: Mecha Error: 62 | English Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. Attempted to display DNPS during the CD play having no disc names preset. [. . . ]